Order Products : sales@su-jiao.com
Unipren® Elastomers B3 NTLA010 55A UP310
| Category: | PP+EPDM , Polypropylene + EPDM Rubber |
| Manufacturer: | Petropol Industry and Trade of Polymers LTDA |
| Trademark: | Unipren® Elastomers |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ZGrxsw_Unipren-Elastomers-B3-NTLA010-55A-UP310.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Thermoplastic compound based on EPDM with PP (TPE-V) dynamically vulcanized, suitable for high performance applications where outdoor exposure or resistance to high temperature (135°C) are important requirements. |
| General Information | |
|---|---|
| Features |
|
| Resin ID (ISO 1043) |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.970 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | 2.0 to 3.0 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 54 to 60 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ASTM D412 | ||
| 100% Strain | 1.70 | MPa | |
| 300% Strain | 3.20 | MPa | |
| Tensile Strength 2(Break) | 5.60 | MPa | ASTM D412 |
| Tensile Elongation 3(Break) | 450 | % | ASTM D412 |
| Tear Strength 4 | 24.0 | kN/m | ASTM D624 |
| Compression Set (70°C, 22 hr) | 33 | % | ASTM D395B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 | hr | |
| Processing (Melt) Temp | 180 to 200 | °C | |
| Mold Temperature | 25.0 to 50.0 | °C |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Die C |
| 3 . | Die C |
| 4 . | Die C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| MARCOBLEND 2200 | POLY GIN | PC | MARCOBLEND |
| Ryton® R-4-230NA | Solvay Specialty Polymers | PPS | Ryton® |
| Delta IPP 2507 | Delta Polymers | PP Copolymer | Delta |
| ExxonMobil™ HDPE HTA 001HD | ExxonMobil Chemical | HDPE, HMW | ExxonMobil™ HDPE |
| Nymax™ NM6000-0001 RS IM Nat | PolyOne Corporation | Nylon 6 | Nymax™ |
