Order Products : sales@su-jiao.com
ESENTTIA 60H92
| Category: | PP Homopolymer , Polypropylene Homopolymer |
| Manufacturer: | Polipropileno del Caribe S.A. |
| Trademark: | ESENTTIA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YRo0kR_ESENTTIA-60H92.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Characteristics: High melt flow rate control reologhy Homopolymer polypropylene with good stiffness/impact balance. Recommended for: Injection molding of thin wall rigid containers, fast cycle time, closures, general purpose injection molding applications. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Mass-Flow Rate (MFR) 1(230°C/2.16 kg) | 60 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 2(Yield, 3.20 mm, Injection Molded) | 37.2 | MPa | ASTM D638 |
| Tensile Elongation 3(Yield, 3.20 mm, Injection Molded) | 7.5 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 4(3.20 mm, Injection Molded) | 1690 | MPa | ASTM D790A |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C, 3.20 mm, Injection Molded) | 32 | J/m | ASTM D256A |
| Note Message | |
|---|---|
| 1 . | Procedure B |
| 2 . | Type I, 50 mm/min |
| 3 . | Type I, 50 mm/min |
| 4 . | Type I, 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| WPP PP WPP311D | Washington Penn Plastic Co. Inc. | PP Impact Copolymer | WPP PP |
| BJB Polyurethane PC-14 A/B-C | BJB Enterprises, Inc. | TSU | BJB Polyurethane |
| APEX® 1008 | Teknor Apex Company | PVC, Flexible | APEX® |
| Lupolen 3426 J | LyondellBasell Industries | LDPE | Lupolen |
| Sylvin 4280-75 Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
