Order Products : sales@su-jiao.com
Auracell® CAP H3
| Category: | CAP , Cellulose Acetate Propionate |
| Manufacturer: | Rotuba Extruders, Inc. |
| Trademark: | Auracell® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | YEtdRz_AuracellCAPH3.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Scented grade |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 66 | °C | |
| Drying Time | 2.0 | hr | |
| Rear Temperature | 168 - 174 | °C | |
| Middle Temperature | 182 - 188 | °C | |
| Front Temperature | 199 - 210 | °C | |
| Nozzle Temperature | 199 - 210 | °C | |
| Mold Temperature | 38 - 82 | °C | |
| Injection Pressure | 8.96 - 11.7 | MPa | |
| Back Pressure | 0.00 - 0.345 | MPa | |
| Vent Depth | 0.051 - 0.076 | mm |
| Injection instructions |
|---|
| Root: 315 to 325°FRear - Root: 325 to 335°FInjection Cycle Times: 8 to 12 secsBooster Cycle Time: 6 to 12 secCure Time: 40 to 70 sec |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Primefin E535/30GC | Lucent Polymers, Inc. | PP, Unspecified | Primefin |
| 4PROP® 9D02420 FRC5HUV | 4Plas | PP Homopolymer | 4PROP® |
| Bergamid™ A700 G30 U-S0 BK064 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| ALCUDIA® EVA PA-447 | REPSOL | EVA | ALCUDIA® EVA |
| DOMAMID® 6G30 | DOMO Engineering Plastics SPA | Nylon 6 | DOMAMID® |
