Order Products : sales@su-jiao.com
SUMIMAC® ECR-9240K
| Category: | Epoxy , Epoxy; Epoxide |
| Manufacturer: | SBHPP |
| Trademark: | SUMIMAC® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XFloWK_SUMIMACECR9240K.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
One component liquid epoxy resin Application : Sensor Advantage : Good adhesive strength and high strength |
| General Information | |
|---|---|
| Features |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Water absorption rate- Boiling water, 2 hrs soaking | 0.5 | wt% |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Adhesion Strength - Al/Al | 10.0 | MPa |
| Mechanical | Nominal Value | Unit | |
|---|---|---|---|
| Flexural Modulus (25°C) | 3500 | MPa | |
| Flexural Strength (25°C) | 95.0 | MPa |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Glass Transition Temperature | 130 | °C | TMA |
| CLTE - Flow | 4.0E-5 | cm/cm/°C | TMA |
| Uncured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Viscosity (25°C) | 7.0 | Pa·s | |
| Curing Time (120°C) | 1.0 | hr |
| Cured Properties | Nominal Value | Unit | |
|---|---|---|---|
| Shore Hardness (Shore D) | 89 | ||
| Volume Resistivity (25°C) | 1.0E+16 | ohms·cm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ALTECH® PC A 1000/121 UV IM | ALBIS PLASTIC GmbH | PC | ALTECH® PC |
| Ateva® 2005A | Celanese EVA Performance Polymers | EVA | Ateva® |
| Clariant Nylon 6/6 6604G43-L | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| ExxonMobil™ LLDPE LL 4004EL Wire&Cable | ExxonMobil Chemical | LLDPE | ExxonMobil™ LLDPE |
| MARPOL® HDM 504-RC | Marco Polo International, Inc. | HDPE | MARPOL® |
