Order Products : sales@su-jiao.com
Lustran® ABS 750
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Styrolution |
| Trademark: | Lustran® ABS |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | XAMmtN_Lustran-ABS-750.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Lustran® 750 resin is a black, virgin injection molding grade of ABS (Acrylonitrile Butadiene Styrene). It is designed for molded drain, waste, and vent (DWV) fittings. Lustran 750 (901802 black) resin meets or exceeds ASTM D 3965 3-2-2-2-2 cell class requirements for ASTM F 628 and D 2661. It is also listed under NSF Standard 14. As with any product, use of Lustran 750 resin in a given application must be tested (including field testing, etc.) in advance by the user to determine suitability. |
| General Information | |
|---|---|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.05 | g/cm³ | ASTM D792 |
| Specific Volume | 0.950 | cm³/g | ASTM D792 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 2070 | MPa | ASTM D638 |
| Tensile Strength (Yield) | 44.8 | MPa | ASTM D638 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | ASTM D256 | ||
| -30°C, 3.18 mm | 190 | J/m | ASTM D256 |
| 23°C, 3.18 mm | 370 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Annealed, 6.35 mm) | 100 | °C | ASTM D648 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 82.2 - 87.8 | °C | |
| Drying Time | 2.0 | hr | |
| Suggested Max Moisture | < 0.050 | % | |
| Suggested Max Regrind | 40 | % | |
| Processing (Melt) Temp | 232 - 243 | °C | |
| Mold Temperature | 43.3 - 65.6 | °C | |
| Injection Rate | Moderate-Fast |
| Injection instructions |
|---|
| Injection Pressure: Moderately High to HighCushion:Minimum |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene T20P100-517UV | RheTech, Inc. | PP, Unspecified | RheTech Polypropylene |
| Nymax™ 1200 A HS BK13A | PolyOne Corporation | Nylon 66 | Nymax™ |
| EVERLON® TS-20 | Ever Polymer Co., Ltd. | SEBS | EVERLON® |
| GPPC ABS D-120 | GPPC Chemical Co., Ltd. | ABS | GPPC ABS |
| OTECH TPO OTR7598 - Gasket | OTECH Corporation | TPE | OTECH TPO |
