Order Products : sales@su-jiao.com
Diofan® 193 D
| Category: | PVDC , Polyvinylidene Chloride |
| Manufacturer: | Solvay Specialty Polymers |
| Trademark: | Diofan® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Wlgfhn_Diofan193D.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| DIOFAN®A 736 is a PVDC latex, suitable as a tough bottom layer, used under the coating of paper, cardboard or hard PVC film, and then covered with appropriate surface coating. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| pH | Acidic | ||
| Surface tension- Foaming trend | 32 | mN/m | |
| Film formation- Minimum film forming temperature | 18 | °C | |
| Solids Content | 55 | % | |
| Density | |||
| Dispersion (wet) | 1.290 | g/cm³ | |
| Coating 1 | 1.650 | g/cm³ | |
| Emulsion type | anion | ||
| Viscosity (20°C) | 11 | mPa·s |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Friction coefficient- vs. Aluminum - Dynamic 2 | 0.20 | mN/m | Internal method |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Maximum heat sealing resistance- with Aluminum - 20 psi - 1s - 1 heated jaw (140°C) 3 | 5.8 | N/cm |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Shelf life- Latex (23°C) | 12 | month |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Transmission Rate (25°C, 85% RH, 1.0 µm) | 54 | cm³/m²/24 hr | ASTM D3985 |
| Water Vapor Transmission Rate 4(38°C, 90% RH, 1.0 µm) | 16 | g/m²/24 hr | ASTM F1249 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| 加工- 干燥 DIOFAN® A 736 具有中等表面张力，可以采用不同的涂布技术，包括逆向凹版辊涂法和气刀法。 高品质涂层需要适当的干燥手段，因为高温有助于更好的阻隔性能。 食品及药品法规 DIOFAN ®A 736 生产用单体符合2011年1月14日欧盟委员会条例第10 / 2011的要求。 所有元素均在欧洲决策委员会AP 2004（1） （计划与食品接触的表面涂层）中列出。 -DIOFAN ®A 736药品主控文件编号为11383-DIOFAN® A 736 符合美国FDA第 21 CFR 175.320, 176.170和 176.180章规定。 DIOFAN® A 736生产用单体符合欧洲议会（EC ）签署的1907 / 2006法规及其理事会于2006年12月18日签署的有关的化学品注册、评估、授权和限制法规（REACH。 SolVin将根据需要提供进一步认证文件. ISO 认证： 经评估，在Tavaux生产的DIOFAN偏二氯乙烯共聚物（PVDC）的生产、内部转移及交付、设计和开发管理体系的实施，符合 ISO 9001： 2008、 ISO 14001： 2004 和OHSAS18001：007的要求。 |
| Note Message | |
|---|---|
| 1 . | Coating performance: 40g/m PVDC coated on 250 µmPVC, 23°C, 50% RH for 6 months |
| 2 . | Tested on PVC (250 µm)/Diofan® A736 (32 gsm)/Diofan® 193 D (8 gsm) structure stored at 40°C for 2 days. |
| 3 . | Tested on PVC (250 µm)/Diofan® A736 (32 gsm)/Diofan® 193 D (8 gsm) structure stored at 40°C for 2 days. |
| 4 . | Coating performance: 40g/m PVDC coated on 250 µmPVC, 23°C, 50% RH for 6 months |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POWERSIL® 420 | Wacker Chemie AG | Silicone | POWERSIL® |
| Tianchen J-700 | Shandong Tianchen Chemical Co., Ltd | CPVC | Tianchen |
| DAI-EL™ G-7201 | DAIKIN AMERICA, INC. | Fluorelastomer | DAI-EL™ |
| Hanwha Total PE 4220S | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | LLDPE | Hanwha Total PE |
| Jam PE 235F7 | Jam Petrochemical Company | LLDPE | Jam PE |
