Order Products : sales@su-jiao.com
REVOLVE® N-307
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Matrix Polymers |
| Trademark: | REVOLVE® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | IdUsad_REVOLVE-N-307.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Revolve ® N-307 is a high density, low melt index hexene polyethylene resin. It has excellent impact strength and is UV10 stabilised. This grade is especially suitable for large tanks. Additionally this grade carries WRC approval for potable water application. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.939 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 3.5 | g/10 min | ISO 1133 |
| Environmental Stress-Cracking Resistance | ASTM D1693 | ||
| 10% Igepal | 400 | hr | |
| 100% Igepal | > 1000 | hr |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield) | 17.7 | MPa | ISO 527-2/50 |
| Flexural Modulus 1 | 790 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| ARM Impact (3.00 mm) | 108 | J |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 48.0 | °C | ISO 75-2/A |
| Note Message | |
|---|---|
| 1 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| POLYNIL® P230 | Nilit Plastics | Nylon 66 | POLYNIL® |
| TRIBOCOMP® PA612 CF30 TS0 | EPIC Polymers | Nylon 612 | TRIBOCOMP® |
| Daelim Po1y® LH-641 | DAELIM INDUSTRIAL CO., LTD. | HDPE | Daelim Po1y® |
| FERREX® GPP20CF64UL-WH | Ferro Corporation | PP Homopolymer | FERREX® |
| KYDEX® 5555 MB | SEKISUI Polymer Innovations, LLC | PMMA+PVC | KYDEX® |
