Order Products : sales@su-jiao.com
Zenite® 17311 EFT
| Category: | LCP , Liquid Crystal Polymer |
| Manufacturer: | Celanese Corporation |
| Trademark: | Zenite® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Vax6mC_Zenite-17311-EFT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| ZENITE® 17311 EFT is a 35% glass and mineral reinforced grade. This grade offers excellent flowability, low warpage, excellent surface appearance, and excellent dimensional stability. Application for this grade is fine pitch connector with thin wall. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Processing Method |
|
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 11000 | MPa | ISO 527-2/1A/1 |
| Tensile Stress (Break) | 110 | MPa | ISO 527-2/1A/5 |
| Tensile Strain (Break) | 2.0 | % | ISO 527-2/1A/5 |
| Flexural Modulus (23°C) | 11000 | MPa | ISO 178 |
| Flexural Stress (23°C) | 160 | MPa | ISO 178 |
| Flexural Strain at Break | 2.4 | % | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 5.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (1.8 MPa, Unannealed) | 298 | °C | ISO 75-2/A |
| Melting Temperature 1 | 346 | °C | ISO 11357-3 |
| Electrical | Nominal Value | Test Method | |
|---|---|---|---|
| Relative Permittivity (2.05 GHz) | 4.18 | IPC TM-650 2.5.5.13 | |
| Dissipation Factor (2.05 GHz) | 4.0E-4 | IPC TM-650 2.5.5.13 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 150 | °C | |
| Drying Time | 3.0 | hr | |
| Suggested Max Moisture | 0.010 | % | |
| Hopper Temperature | 20.0 - 30.0 | °C | |
| Rear Temperature | 330 - 350 | °C | |
| Middle Temperature | 340 - 360 | °C | |
| Front Temperature | 345 - 365 | °C | |
| Nozzle Temperature | 355 - 370 | °C | |
| Processing (Melt) Temp | 360 - 370 | °C | |
| Mold Temperature | 80.0 - 120 | °C | |
| Injection Pressure | 50.0 - 150 | MPa | |
| Holding Pressure | 50.0 - 150 | MPa | |
| Back Pressure | 0.00 - 3.00 | MPa |
| Injection instructions |
|---|
| Feed Temperature: 40 to 60°CZone 4 Temperature: 355 to 370°C |
| Note Message | |
|---|---|
| 1 . | 10°C/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Witcom PC 2L1 | Witcom Engineering Plastics B.V. | PC | Witcom PC |
| 3M™ Dyneon™ TFM™ Modified PTFE Compound TFM 4216 | 3M Advanced Materials Division | PTFE | 3M™ Dyneon™ TFM™ Modified PTFE Compound |
| ELASTOSIL® E 43 | Wacker Chemie AG | Silicone | ELASTOSIL® E |
| SABIC® EPDM 855 | Saudi Basic Industries Corporation (SABIC) | EPDM | SABIC® EPDM |
| Sylvin 8729-85 Black | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
