Order Products : sales@su-jiao.com
Fluoroplex GF 515 - GML
| Category: | PTFE , Polytetrafluoroethylene |
| Manufacturer: | UNIFLON |
| Trademark: | Fluoroplex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | VU7Fd8_Fluoroplex-GF-515---GML.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Fluoroplex GF 515-GML is a polytetrafluoroethylene (PTFE) product, which contains 15% glass fiber reinforced materials and 5.0% graphite powder. It can be processed by sintering or injection molding and is available in North America or Latin America. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 2.20 - 2.24 | g/cm³ | Internal method |
| Contractility- Sintering | 0.90 - 1.9 | % | Internal method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Sintering Temperature - Maximum | 365 | °C |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 61 - 66 | Internal method |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | 19.0 | MPa | Internal method |
| Tensile Elongation (Break) | 160 | % | Internal method |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Code: 010019801 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 21.0 - 25.0 | °C | |
| Injection Pressure | 49.0 - 58.8 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Spartech PC PC-2000 | Spartech Plastics | PC | Spartech |
| TRIBOCOMP® PPS GF30 TS0 | EPIC Polymers | PPS | TRIBOCOMP® |
| Celstran® PA66-GF50-07 | Celanese Corporation | Nylon 66 | Celstran® |
| KYDEX® 6200 LTR | SEKISUI Polymer Innovations, LLC | PMMA+PVC | KYDEX® |
| LNP™ THERMOCOMP™ RF006ESZ compound | SABIC Innovative Plastics | Nylon 66 | LNP™ THERMOCOMP™ |
