Order Products : sales@su-jiao.com
NIMA HL 18400
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Ovation Polymers Inc. |
| Trademark: | NIMA |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | bh7tu7_NIMA-HL-18400.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| High Density Polyethylene - Halogenated FR compound with good impact resistance. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.30 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus 1 | 400 | MPa | ASTM D638 |
| Tensile Strength 2 | ASTM D638 | ||
| Yield | 18.0 | MPa | ASTM D638 |
| Fracture | 15.0 | MPa | ASTM D638 |
| Tensile Elongation 3(Break) | 50 | % | ASTM D638 |
| Flexural Modulus 4(50.0 mm Span) | 320 | MPa | ASTM D790 |
| Flexural Strength 5(Break, 50.0 mm Span) | 16.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (23°C) | 190 | J/m | ASTM D256 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | V-0 | UL 94 |
| Additional Information |
|---|
| Tensile Elongation at Break, ASTM D638: >50% |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 50 mm/min |
| 4 . | 1.3 mm/min |
| 5 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Riblene® MQ 10 R | Versalis S.p.A. | LDPE | Riblene® |
| SLOVAMID® 66 T 40 | Plastcom | Nylon 66 | SLOVAMID® 66 |
| NAXELL™ PC210HR | MRC Polymers, Inc. | PC | NAXELL™ |
| Andur AL 80-5 AP/Curene® 110 | Anderson Development Company | PUR-Eth,aliphat | Andur |
| Huaxia Shenzhou DS603-A | Shandong Huaxia Shenzhou New Material Co., Ltd. | Fluoropolymer | Huaxia Shenzhou |
