Category: | LDPE , Low Density Polyethylene |
Manufacturer: | Kazanorgsintez Joint Stock Company |
Trademark: | Kazan LDPE |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | V2gAbw_Kazan-LDPE-15313-003-OKP-22-1111-2002.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
GOST / TU: GOST 16337-77 LDPE is produced by means of polymerization of ethyiene under high pressure in tubular or stirred reactorwith the use of radical type initiator. LDPE is used for manufacturing of pipes, fittings, articles contacting with food, toys, films etc. |
General Information | |
---|---|
Uses |
|
Forms |
|
Physical | Nominal Value | Unit | |
---|---|---|---|
Density | 0.919 to 0.922 | g/cm³ | |
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 0.30 | g/10 min | |
Environmental Stress-Cracking Resistance | > 500 | hr | |
Extractables 1 | < 0.6 | % | |
Melt Flow - Dispersin within a batch 2 | < 12 | % |
Additional Information | Nominal Value | ||
---|---|---|---|
Number of Inclusions | > 8.00 | ||
Odor Rating | < 1.00 |
Mechanical | Nominal Value | Unit | |
---|---|---|---|
Tensile Stress | |||
Yield | > 105 | MPa | |
Break | > 105 | MPa | |
Tensile Strain (Break) | > 600 | % |
Note Message | |
---|---|
1 . | Premium grade, Grade I, II |
2 . | ± |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Maxxam™ PPH-40G Nat | PolyOne Corporation | PP Homopolymer | Maxxam™ |
RTP 2799 S X 120826 A NATURAL | RTP Company | SEBS | RTP |
RTP 300 MG 20 HF | RTP Company | PC | RTP |
VITAMIDE® AR66 | A. Schulman Europe | Nylon 66 | VITAMIDE® |
TYRIN™ 3611E | The Dow Chemical Company | CPE | TYRIN™ |