AXELERON™ CX 4960 NT CPD Datasheet,LDPE,The Dow Chemical Company-SHANGHAI SUSHENG

Message
AXELERON™CX 4960 NT CPD is a kind of low density polyethylene material, which is used in the field of insulating materials. This application requires the material to have a good porous structure and low electrical loss. The product contains a heat-sensitive blow molding additive with a density between 0.40 and 0.48g/cm3. AXELERON™CX 4960 NT CPD is widely used in coaxial cable applications, such as parallel two-wire cables and CATV cables.

General Information
Uses	Cellular Insulation Coaxial Cable Insulation Wire and cable applications Foam Communication Equipment
Forms	Particle

Physical	Nominal Value	Unit	Test Method
Specific Gravity			ASTM D792
-- ¹	0.440	g/cm³	ASTM D792
-- ²	0.918	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.8	g/10 min	ASTM D1238

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength			ASTM D638
-- ³	4.14	MPa	ASTM D638
-- ⁴	11.4	MPa	ASTM D638
Tensile Elongation			ASTM D638
Fracture ⁵	300	%	ASTM D638
Fracture ⁶	500	%	ASTM D638

Electrical	Nominal Value	Unit	Test Method
Dielectric Strength ⁷(3.18 mm)	8.7	kV/mm	ASTM D149
Dielectric Constant			ASTM D1531
1 MHz ⁸	1.50		ASTM D1531
1 MHz ⁹	2.28		ASTM D1531
Dissipation Factor			ASTM D1531
1 MHz ¹⁰	1.5E-4		ASTM D1531
1 MHz ¹¹	3.0E-4		ASTM D1531

Extrusion	Nominal Value	Unit
Melt Temperature	138 - 160	°C

Extrusion instructions
AXELERON™ CX 4960 NT CPD provides excellent surface finish and outstanding output rates over a broad range of conditions. For optimum results, use melt extrusion temperatures in the suggested range of 280 to 320°F (138-160°C). However, specific recommendations for processing conditions can be determined only when the application and type of processing equipment are known. Please contact your local Dow Wire and Cable sales representative for such particulars.

Extrusion instructions

AXELERON™ CX 4960 NT CPD provides excellent surface finish and outstanding output rates over a broad range of conditions. For optimum results, use melt extrusion temperatures in the suggested range of 280 to 320°F (138-160°C). However, specific recommendations for processing conditions can be determined only when the application and type of processing equipment are known. Please contact your local Dow Wire and Cable sales representative for such particulars.

Note Message
1 .	Expanded: values largely subject to processing conditions
2 .	Solid
3 .	Expanded: values largely subject to processing conditions
4 .	Solid
5 .	Expanded: values largely subject to processing conditions
6 .	Solid
7 .	Method A (short time)
8 .	Expanded: values largely subject to processing conditions
9 .	Unexpanded
10 .	Expanded: values largely subject to processing conditions
11 .	Unexpanded

Category:	LDPE , Low Density Polyethylene Cellular Insulation Compound
Manufacturer:	The Dow Chemical Company
Trademark:	AXELERON™
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	UI0buC_AXELERON-CX-4960-NT-CPD.pdf
PRICE:	Order Products email sales@su-jiao.com

Resin Grade	Manufacturer	Category	Trademark
PRL PCSF-FRG20	Polymer Resources Ltd.	PC	PRL
Radilon® S CV300 100 NAT	Radici Plastics	Nylon 6	Radilon®
TECHNAMID® A A-SV25-ETK	Poly Plastic	Nylon 66	TECHNAMID® A
Europrene® N 3345	Versalis S.p.A.	NBR	Europrene®
CYCOLOY™ C6600 resin	SABIC Innovative Plastics Asia Pacific	PC+ABS	CYCOLOY™