RTP 3483-1

Category: LCP , Liquid Crystal Polymer
Manufacturer: RTP Company
Trademark: RTP
Fillers: -
Ports: Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms FOB, CIF, DAP, DAT, DDP
PDF: Tff6nf_RTP-3483-1.pdf
PRICE: ​Order Products​ email   sales@su-jiao.com
Wechat: WECHAT
Message
Carbon Fiber
General Information
Filler / Reinforcement
  • Carbon fiber reinforced material, 20% filler by weight
RoHS Compliance
  • Contact manufacturer
Processing Method
  • Injection molding
PhysicalNominal ValueUnitTest Method
Specific Gravity 1.46g/cm³ASTM D792
Molding Shrinkage - Flow (3.20 mm)0.10%ASTM D955
MechanicalNominal ValueUnitTest Method
Tensile Modulus 20700MPaASTM D638
Tensile Strength 190MPaASTM D638
Tensile Elongation (Yield)2.0 - 3.0%ASTM D638
Flexural Modulus 17200MPaASTM D790
Flexural Strength 262MPaASTM D790
ImpactNominal ValueUnitTest Method
Notched Izod Impact (3.20 mm)190J/mASTM D256
Unnotched Izod Impact (3.20 mm)640J/mASTM D4812
ThermalNominal ValueUnitTest Method
Deflection Temperature Under Load (1.8 MPa, Unannealed)227°CASTM D648
Additional InformationNominal ValueUnit
Primary Additive 20%
InjectionNominal ValueUnit
Drying Temperature 149°C
Drying Time 4.0hr
Processing (Melt) Temp 271 - 302°C
Mold Temperature 37.8 - 93.3°C
Injection Pressure 34.5 - 82.7MPa
Injection instructions
The key to successfully molding this material is to start mold open cycles as soon as the screw reaches its retracted position.
Resin Grade Manufacturer Category Trademark
Propilven S-801 Propilven, S.A. PP Homopolymer Propilven
ULTEM™ 2300F resin SABIC Innovative Plastics PEI ULTEM™
Colorite 66 Series 7566 Colorite Polymers PVC, Unspecified Colorite 66 Series
Generic Nylon 6/6T Generic Nylon 6/6T Generic
ICORENE® N1007 ICO Polymers EMEA, A Division of A. Schulman EVA ICORENE®