Order Products : sales@su-jiao.com

Exelene® HDPE PE80

Category:	HDPE, HMW , High Density (HMW) Polyethylene
Manufacturer:	Montachem International, Inc.
Trademark:	Exelene® HDPE
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	5ifX2P_Exelene-HDPE-PE80.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Applications:

Corrugated pipe

Non pressure pipe extrusion

Characteristics:

The Exelene resin HDPE PE80 meets the requirements of section 177.1520, paragraph C, from chapter 21 denominated "Olefin Polymers" from the Code of Federal Regulations of the FDA, to be utilized with direct food contact.

General Information
Features	Food Contact Acceptable High Density High Molecular Weight
Uses	Corrugated Pipe Food Service Applications Non-specific Food Applications Piping
Agency Ratings	FDA 21 CFR 177.1520(c)
Processing Method	Pipe Extrusion

Physical	Nominal Value	Unit	Test Method
Specific Gravity	0.947	g/cm³	ASTM D792
Melt Mass-Flow Rate (MFR)			ASTM D1238
190°C/2.16 kg	0.040	g/10 min
190°C/21.6 kg	8.5	g/10 min
Environmental Stress-Cracking Resistance (3.10 mm, F50)	500	hr	ASTM D1693A
ESCR - NCTL 15%	16.7	day	ASTM F2136

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield)	24.8	MPa	ASTM D638
Tensile Elongation ²(Break)	600	%	ASTM D638

Impact	Nominal Value	Unit	Test Method
Tensile Impact Strength	242	kJ/m²	ASTM D1822

Note Message
1 .	Type IV, 50 mm/min
2 .	Type IV, 50 mm/min

Resin Grade	Manufacturer	Category	Trademark
Radiflam® A AEK 121 C NAT 2025	Radici Plastics	Nylon 66	Radiflam®
THERMOLAST® K TC8CSN (Series: CS)	KRAIBURG TPE	TPE	THERMOLAST® K
Jackdaw PP ER76NT6354	Jackdaw Polymers	PP, Unspecified	Jackdaw PP
KMI PP KM573-MJ	KMI Group, Inc.	PP Impact Copolymer	KMI PP
Hylex® P1307L3 HB	Entec Polymers	PC	Hylex®