Order Products : sales@su-jiao.com
TES J-1200/20/VO
| Category: | ABS , Acrylonitrile Butadiene Styrene |
| Manufacturer: | Techmer Engineered Solutions |
| Trademark: | TES |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TeEMt2_TES-J-1200-20-VO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Molding Parameters: For 2-zone machines, the rear temperature is 450-520°F, and the front temperature is 420-470°F. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Additive |
|
| Features |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.37 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18 mm | 0.080 | % | |
| 6.35 mm | 0.18 | % | |
| Water Absorption (24 hr) | 0.22 | % | ASTM D570 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (M-Scale) | 59 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (23°C) | 5170 | MPa | ASTM D638 |
| Tensile Strength (Break, 23°C) | 83.4 | MPa | ASTM D638 |
| Tensile Elongation (Break, 23°C) | 2.7 | % | ASTM D638 |
| Flexural Modulus (23°C) | 6480 | MPa | ASTM D790 |
| Flexural Strength (Break, 23°C) | 112 | MPa | ASTM D790 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed | 101 | °C | |
| 1.8 MPa, Unannealed | 100 | °C |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating (1.59 mm) | V-0 | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 71.1 | °C | |
| Drying Time | 1.0 | hr | |
| Rear Temperature | 216 to 232 | °C | |
| Middle Temperature | 221 to 238 | °C | |
| Front Temperature | 210 to 221 | °C | |
| Nozzle Temperature | 199 to 221 | °C | |
| Processing (Melt) Temp | 232 to 260 | °C | |
| Mold Temperature | 71.1 to 87.8 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 4003 TFE 15 | RTP Company | PPA | RTP |
| ADDILENE J 326 V30 | ADDIPLAST | PP Copolymer | ADDILENE |
| Grivory® HTV-6H1 nat | EMS-GRIVORY | Nylon 6I/6T | Grivory® |
| HIDEN® M830 | YUHWA Korea Petrochemical Ind. Co., Ltd. | HDPE | HIDEN® |
| KOPELEN JI-320 | Lotte Chemical Corporation | PP Impact Copolymer | KOPELEN |
