Order Products : sales@su-jiao.com
Salflex 355A
| Category: | TPV , Thermoplastic Vulcanizate |
| Manufacturer: | Salflex Polymers Ltd. |
| Trademark: | Salflex |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TGlPCw_Salflex-355A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Salflex 355A is a thermoplastic vulcanized rubber (TPV) product,. It can be processed by blow molding, extrusion or injection molding, and is available in North America. Salflex 355A applications include the automotive industry and engineering/industrial accessories. Features include:
|
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.970 | g/cm³ | ISO 1183/A |
| Molding Shrinkage | 1.6 - 2.0 | % | ISO 294-4 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec) | 58 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 2.10 | MPa | ISO 37 |
| Tensile Stress (Break) | 5.10 | MPa | ISO 37 |
| Tensile Elongation (Break) | 440 | % | ISO 37 |
| Tear Strength 1 | 30 | kN/m | ISO 34-1 |
| Compression Set (125°C, 70 hr) | 44 | % | ISO 815 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air (150°C, 168 hr) | -20 | % | ISO 188 |
| Change in Tensile Strain at Break in Air (150°C, 168 hr) | -4.5 | % | ISO 188 |
| Change in Shore Hardness in Air (Shore A, 150°C, 168 hr) | 0.0 | ISO 188 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature (Type B) | -60.0 | °C | ISO 812 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 - 75.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Rear Temperature | 185 - 205 | °C | |
| Middle Temperature | 190 - 220 | °C | |
| Front Temperature | 190 - 225 | °C | |
| Nozzle Temperature | 195 - 230 | °C | |
| Processing (Melt) Temp | 190 - 210 | °C | |
| Mold Temperature | 27.0 - 40.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 60.0 - 75.0 | °C | |
| Drying Time | 2.0 - 4.0 | hr | |
| Cylinder Zone 1 Temp. | 175 - 200 | °C | |
| Cylinder Zone 2 Temp. | 175 - 205 | °C | |
| Cylinder Zone 3 Temp. | 175 - 205 | °C | |
| Cylinder Zone 4 Temp. | 175 - 215 | °C | |
| Melt Temperature | 180 - 215 | °C | |
| Die Temperature | 180 - 220 | °C |
| Extrusion instructions |
|---|
| Blow Molding Mold Temperature: 5 to 60°C |
| Note Message | |
|---|---|
| 1 . | Method B, right-angle specimen (cut) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Radilon® AGV HW 35 Black E | Radici Plastics | Nylon 66 | Radilon® |
| Vexel 4150 | Custom Resins Group | PBT | Vexel |
| Orgalloy® LT 5050 | Arkema | Nylon 6 Alloy | Orgalloy® |
| POLYFLAM® RPP 2000 | A. Schulman Europe | PP Homopolymer | POLYFLAM® |
| LNP™ COLORCOMP™ 143C compound | SABIC Innovative Plastics | PC | LNP™ COLORCOMP™ |
