Order Products : sales@su-jiao.com

3M™ Dyneon™ Fluoroelastomer FT 2481

Category:	Fluorelastomer , Fluoroelastomer
Manufacturer:	3M Advanced Materials Division
Trademark:	3M™ Dyneon™ Fluoroelastomer
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	SXhsZM_3MDyneonFluoroelastomerFT2481.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

3M™ Dyneon™ Fluoroelastomer FT 2481 is a terpolymer made from hexafluoropropylene, vinylidene fluoride and tetrafluoroethylene. It is a raw gum without curatives.

Special Features

Composition: terpolymer of vinylidene fluoride, hexafluoropropylene and tetrafluoroethylene

Process targets: compression moulding

Amine and bisphenol curable

High viscosity gum stock without incorporated curatives

Improved resistance to organic solvents compared to dipolymers

General Information
Features	Terpolymer Viscosity, High
Uses	O-rings
Forms	Thick sheet
Processing Method	Compression molding

Physical	Nominal Value	Unit	Test Method
Specific Gravity	1.86	g/cm³	Internal method
Mooney Viscosity (ML 1+10, 121°C)	75	MU	Internal method
Fluorine Content	69	%	Internal method

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore A)	75		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Stress ¹(100% Strain)	5.50	MPa	ASTM D412A
Tensile Strength ²	15.2	MPa	ASTM D412A
Tensile Elongation ³(Break)	220	%	ASTM D412A
Compression Set (200°C, 70 hr)	24	%	ASTM D1414

Note Message
1 .	D mould
2 .	Die D
3 .	D mould

Resin Grade	Manufacturer	Category	Trademark
APEX® 3210-55NT	Teknor Apex Company	PVC, Flexible	APEX®
Fiberfil® NY-6/33	Fiberfil® Engineered Plastics Inc.	Nylon 6	Fiberfil®
EPO-TEK® B9126-8	Epoxy Technology Inc.	Epoxy	EPO-TEK®
Keysor PVC KYFF	Keysor-Century Corporation	PVC, Unspecified	Keysor PVC
Plaslube® PA6 GF10 TL10	Techmer Engineered Solutions	Nylon 6	Plaslube®