Order Products : sales@su-jiao.com
Mecoline IS TP 1002 F
| Category: | TP, Unspecified , Thermoplastic |
| Manufacturer: | Melos GmbH |
| Trademark: | Mecoline |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RdgB4V_Mecoline-IS-TP-1002-F.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Halogen-free, low smoke, thermoplastic, flame retardant compound for the sheathing and insulation of low and medium voltage cables in General Installation applications. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Wire Types |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.58 | g/cm³ | ISO 1183/A |
| Melt Mass-Flow Rate (MFR) (150°C/21.6 kg) | 7.0 | g/10 min | ISO 1133 |
| Mooney Viscosity (ML 1+4, 150°C) | 38 | MU | DIN 53523 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Shore Hardness (Shore D) | 55 | ISO 7619 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | 11.0 | MPa | IEC 811-1-1 |
| Tensile Strain (Break) | 190 | % | IEC 811-1-1 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air | IEC 811-1-2 | ||
| 100°C, 240 hr | 5.5 | % | |
| 110°C, 168 hr | -10 | % | |
| Change in Tensile Strain at Break in Air | IEC 811-1-2 | ||
| 100°C, 240 hr | -2.7 | % | |
| 110°C, 168 hr | -3.8 | % |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Hot Pressure Test | DIN VDE 0472 | ||
| penetration 6h at 80°C | 1.0 | % | |
| penetration 6h at 90°C | 8.0 | % | |
| Temperature Index | 295 | °C | NES 715 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Head Temperature | 140 to 160 | °C | |
| Extruder Screw L/D Ratio | 20.0:1.0 to 25.0:1.0 | ||
| Extruder Screw Compression Ratio | 1.0:1.2 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity 1(23°C) | 1.5E+12 | ohms·cm | IEC 60093 |
| Electric Strength 2(23°C) | 20 | kV/mm | IEC 60243-1 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Oxygen Index | 37 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 90.0 to 110 | °C | |
| Cylinder Zone 2 Temp. | 105 to 125 | °C | |
| Cylinder Zone 3 Temp. | 120 to 140 | °C | |
| Cylinder Zone 4 Temp. | 120 to 140 | °C | |
| Cylinder Zone 5 Temp. | 130 to 150 | °C | |
| Adapter Temperature | 135 to 155 | °C | |
| Die Temperature | 150 to 170 | °C |
| Note Message | |
|---|---|
| 1 . | 500V |
| 2 . | 50 Hz |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Texalan® 7 Series 772D | Austin Novel Materials Co. Ltd. | TPU Alloy | Texalan® 7 Series |
| Zytel® BM73G15THS BK317 | DuPont Performance Polymers | Nylon 6 | Zytel® |
| Leona™ 54G43 | Asahi Kasei Chemicals Corporation | Nylon 66 | Leona™ |
| MTEGRITY™ LDPE LD220AM | M. Holland Company | LDPE | MTEGRITY™ LDPE |
| LNP™ THERMOCOMP™ DF006ER compound | SABIC Innovative Plastics | PC | LNP™ THERMOCOMP™ |
