Order Products : sales@su-jiao.com

NuSil MED-6381

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	GZ0gGE_NuSil-MED-6381.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days). A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices. Comments: FIRM RTV GEL

Message

NuSil Technology's unrestricted materials may be considered for long-term implant applications (greater than 29 days).

A silicone gel is an unreinforced, loosely crosslinked network of polymers. Due to the lack of reinforcing fi ller, gels tend to be low in viscosity in the uncured state, allowing fl exibility for various processing techniques. Not only can the crosslink density of the silicone polymers be designed to yield a very fi rm or soft gel, but the work time and cure profi le can also be modifi ed. Accordingly, gels can be used in a variety of applications, including sheeting and encapsulating sensors or electronic devices.

Comments: FIRM RTV GEL

General Information
Features	Biocompatible Breathable Low Viscosity Room Temperature Vulcanizing
Uses	Electrical/Electronic Applications Medical/Healthcare Applications
Agency Ratings	USP Class VI
Forms	Gel
Processing Method	Encapsulating

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 97
Part B	Mix Ratio by Weight: 2.5
Part C	Mix Ratio by Weight: 0.50

Additional Information	Nominal Value	Unit
Cure System	Condensation

Uncured Properties	Nominal Value	Unit
Density	0.978	g/cm³
Viscosity	10	Pa·s
Curing Time (23°C)	0.50	hr

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore OO)	75
Tensile Strength	0.483	MPa
Tensile Elongation at Break	130	%

Resin Grade	Manufacturer	Category	Trademark
Velocity® LGF60-PA6	PlastiComp, Inc.	Nylon 6	Velocity®
HiFill® PA6/6 GF/M35 HS BK	Techmer Engineered Solutions	Nylon 66	HiFill®
LNP™ LUBRICOMP™ DFL32XXP compound	SABIC Innovative Plastics Europe	PC	LNP™ LUBRICOMP™
Pier One POM AH500TF10 NC010	Pier One Polymers, Inc.	Acetal (POM) Homopolymer	Pier One POM
PENTAMID A H TF20 natural	PENTAC Polymer GmbH	Nylon 66	PENTAMID A