Order Products : sales@su-jiao.com
Epolene® C-15P
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | Westlake Chemical Corporation |
| Trademark: | Epolene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | RRuH59_Epolene-C-15P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Epolene C-15P is a branched low density polyethylene homopolymer powder with low color and medium molecular weight. It is useful as a base polymer for adhesives and coatings, color concentrate dispersions, and to provide lubricity in rubber compounding. Coatings produced with Epolene C-15P exhibit high gloss, low moisture vapor transmission rates, grease resistance, and good heat seal ability. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Physical | Nominal Value | ||
|---|---|---|---|
| Molecular Weight 1 | 17000 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Ring and Ball Softening Point | 101 | °C | ASTM E28 |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Penetration Hardness 2(25°C) | 400 | mm | ASTM D5 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Melt Viscosity | |||
| 190°C | 1800 | mPa·s | |
| 125°C | 8950 | mPa·s |
| Note Message | |
|---|---|
| 1 . | Molecular weight measured via Gel Permeation Chromatography (GPC) using polystyrene standards |
| 2 . | Needle under 100-g load for 5s, tenths of mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Syncure™ S1060A Natural | PolyOne Corporation | XLPE | Syncure™ |
| HiFill® PA4/6 GF5 HS BK002 | Techmer Engineered Solutions | Nylon 46 | HiFill® |
| Innova R 830D | Innova SA | PS (HIPS) | Innova |
| Lusin® Alro OL 151 | Chem-Trend L.P. | Unspecified | Lusin® |
| ENFLEX VU-420-55A | ENPLAST, a Ravago Group Company | PP+EPDM | ENFLEX |
