Order Products : sales@su-jiao.com

SQUARE® LIM1530-35A/B

Category:	Silicone Rubber, LSR , Silicone Rubber, LSR
Manufacturer:	Shenzhen SQUARE Silicone Co., Ltd.
Trademark:	SQUARE®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	RLUYzP_SQUARELIM153035AB.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Semi-conductive liquid silicone rubber material for cold shrink cable accessories Product Description The product is one kind of 2-part conductive liquid silicone rubber, catalyzed by platinum, mixing ratio of parts A:B=1:1. Key Features Resistivity: <100ohm.cm High elongation suitable for making sheet without crack Low shrinkage,good rebound Stable resistivity Suitable for injection molding At the temperature of 20°C and in the condition of air-proof, the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature. Applications Suitable for insulator terminals or connector's stress cone semi-conductor

Message

Semi-conductive liquid silicone rubber material for cold shrink cable accessories

Product Description
The product is one kind of 2-part conductive liquid silicone rubber, catalyzed by platinum, mixing ratio of parts A:B=1:1.

Key Features

Resistivity: <100ohm.cm

High elongation suitable for making sheet without crack

Low shrinkage,good rebound

Stable resistivity

Suitable for injection molding

At the temperature of 20°C and in the condition of air-proof, the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature.

Applications

Suitable for insulator terminals or connector's stress cone semi-conductor

General Information
Features	Semi-conductive Low shrinkage Extended tensile rate
Uses	Electrical components Wire and cable applications Sheet
Processing Method	Liquid Injection Molding (LIM)

Hardness	Nominal Value		Test Method
Durometer Hardness (Shore A)	40		ASTM D2240

Elastomers	Nominal Value	Unit	Test Method
Tensile Set ¹	4	%	ASTM D412
Tensile Strength	6.00	MPa	ASTM D412
Tensile Elongation (Break)	650	%	ASTM D412
Tear Strength ²	20.0	kN/m	ASTM D624

Electrical	Nominal Value	Unit
Volume Resistivity	50	ohms·cm

Thermoset	Nominal Value	Unit
Thermoset Components
Component a	Mixing ratio by weight: 1.0
Component B	Mixing ratio by weight: 1.0
Pot Life (20°C)	7200	min
Shelf Life	52	wk

Uncured Properties	Nominal Value	Unit
Curing Time (170°C)	0.17	hr

Note Message
1 .	C mould
2 .	B mould

Resin Grade	Manufacturer	Category	Trademark
Akulon® K224-LG6 /E	DSM Engineering Plastics	Nylon 6	Akulon®
Karina BLACK PVC COMPOUND 807D48/ 1-C-IS-LMP	Karina Ind. e Com. de Plásticos Ltda	PVC, Unspecified	Karina
OmniCarb™ PC GR10 CBFR0	OMNI Plastics, LLC	PC	OmniCarb™
POLYfill PPHC TS20040	Polykemi AB	PP, Unspecified	POLYfill
Thermec N™ 4314R25T1H	Technical Polymers, LLC	PPA	Thermec N™