Order Products : sales@su-jiao.com

KUBE PIR 22300

Category:	HDPE , High Density Polyethylene
Manufacturer:	KUBE Electronics AG
Trademark:	KUBE PIR
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	R1fk4Z_KUBE-PIR-22300.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Transmissive Plastic Injection Molding Granulates

For fresnel lenses and windows of PIR motion detectors, thermal imaging cameras and non-contact thermometers

Features:

The best material for fresnel lenses

Specially suited for thin parts

High transmission in the 7 to 14 µm central passive infrared (PIR) band

Choice of colors and MFI

RoHS and TSCA conform

Excellent visible light absorption available for low false alarm rate / VDS conformity

Special colors available on request

According to KUBE's experience, these materials exhibit no substantial loss of specification over 10 years

22300: standard material for opaque lenses used indoors

General Information
Features	Flame Retardant
Uses	Lenses Thin-walled Parts
RoHS Compliance	RoHS Compliant
Appearance	Colors Available Opaque
Forms	Granules

Physical	Nominal Value	Unit	Test Method
Density	0.951 to 0.960	g/cm³	ISO 1183
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	17	g/10 min	ISO 1133

Mechanical	Nominal Value	Unit	Test Method
Tensile Modulus	878	MPa	ISO 527-2
Tensile Stress			ISO 527-2
Yield	23.8	MPa
Break	12.0	MPa
Tensile Strain			ISO 527-2
Yield	3.0	%
Break	51	%

Impact	Nominal Value	Unit	Test Method
Charpy Notched Impact Strength			ISO 179
-30°C	3.3	kJ/m²
23°C	3.6	kJ/m²
Charpy Unnotched Impact Strength			ISO 179
-30°C	97	kJ/m²
23°C	97	kJ/m²

Injection	Nominal Value	Unit
Drying Temperature	< 70.0	°C
Drying Time	2.0	hr
Hopper Temperature	50.0 to 70.0	°C
Rear Temperature	170 to 220	°C
Middle Temperature	200 to 220	°C
Front Temperature	210 to 220	°C
Nozzle Temperature	220 to 230	°C
Processing (Melt) Temp	130	°C

Resin Grade	Manufacturer	Category	Trademark
VICTREX® PEEK 90CA30	Victrex plc	PEEK	VICTREX® PEEK
ASTATAL™ F30	Marplex Australia Pty. Ltd.	Acetal (POM) Homopolymer	ASTATAL™
Cheng Yu A778	Cheng Yu Plastic Company Limited	ABS	Cheng Yu
Durolon® VR2200 CR010	Unigel Plásticos	PC	Durolon®
Dow Corning® MG-2502	Dow Corning Corporation	Silicone	Dow Corning®