Order Products : sales@su-jiao.com
AMPLIFY™ TY 1351
| Category: | MAH-g , Functional Polymer |
| Manufacturer: | The Dow Chemical Company |
| Trademark: | AMPLIFY™ TY |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | QhB1gv_AMPLIFY-TY-1351.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
AMPLIFY™ TY 1351 Functional Polymer is a maleic anhydride grafted (MAH) polymer. In tie layers for flexible packaging, AMPLIFY TY 1351 Functional Polymer promotes adhesion of Polyethylene to barrier polymers such as polyamide and other polar substrates. Main Characteristics:
Complies with:
|
| General Information | |
|---|---|
| Agency Ratings |
|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.923 | g/cm³ | ASTM D792 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 2.1 | g/10 min | ASTM D1238, ISO 1133 |
| MAH Graft Level 1 | Low | Internal method |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Puncture Resistance (51 µm) | 11.6 | J/cm³ | Internal method |
| secant modulus | ASTM D882 | ||
| 2% secant, MD : 51 µm | 209 | MPa | ASTM D882 |
| 2% secant, TD : 51 µm | 229 | MPa | ASTM D882 |
| Tensile Strength | ASTM D882 | ||
| MD : Yield, 51 µm | 10.5 | MPa | ASTM D882 |
| TD : Yield, 51 µm | 11.3 | MPa | ASTM D882 |
| MD : Fracture, 51 µm | 36.1 | MPa | ASTM D882 |
| TD : Fracture, 51 µm | 29.2 | MPa | ASTM D882 |
| Tensile Elongation | ASTM D882 | ||
| MD : Fracture, 51 µm | 690 | % | ASTM D882 |
| TD : Fracture, 51 µm | 690 | % | ASTM D882 |
| Dart Drop Impact (51 µm) | 260 | g | ASTM D1709 |
| Elmendorf Tear Strength 2 | ASTM D1922 | ||
| MD : 51 µm | 750 | g | ASTM D1922 |
| TD : 51 µm | 1100 | g | ASTM D1922 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 98.9 | °C | ASTM D1525 |
| Melting Temperature (DSC) | 123 | °C | Internal method |
| Optical | Nominal Value | Test Method | |
|---|---|---|---|
| Gloss (45°, 50.8 µm) | 70 | ASTM D2457 |
| Extrusion instructions |
|---|
| Recommended Melt Temperature - 400-446°FFabrication Conditions for Blown Film Screw Size: 2.5 in. (63.5 mm); 24:1 L/D Screw Type: Barrier screw Die Gap: 70 mil (1.8 mm) Melt Temperature: 430°F (221°C) Output: 6 lb/hr/in of die circumference Die diameter: 6 in Blow-Up Ratio: 2.5:1 Screw Speed: 70 rpm |
| Note Message | |
|---|---|
| 1 . | Low: <0.25 wt%, Medium 0.25-0.5, High >0.5 wt% |
| 2 . | Method B |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 9993-65 Yellow 4141 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Daicel PP PT4N1 | Daicel Polymer Ltd. | PP, Unspecified | Daicel PP |
| Epoxies, Ect. 20-3004 HV | Epoxies, Etc. | Epoxy | Epoxies, Ect. |
| Hylac® GP27 | Ravago Manufacturing Americas, LLC | ABS | Hylac® |
| Hifax TYC 2005P S62840 | LyondellBasell Industries | PP Copolymer | Hifax |
