Order Products : sales@su-jiao.com
KRATON® D1157 E
| Category: | SBS , Styrene Butadiene Styrene Block Copolymer |
| Manufacturer: | Kraton Polymers LLC |
| Trademark: | KRATON® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Q9m6oy_KRATON-D1157-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
Kraton D1157 E is a clear, linear block copolymer based on styrene and butadiene with bound styrene of 29.5% mass. It is supplied from Europe in the physical form(s) identified below in the grade nomenclature:
Kraton D1157 E is used as a modifier of bitumen or thermoplastics and in compound formulations. It may also find use as an ingredient in formulating adhesives, sealants and coatings. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.940 | g/cm³ | ISO 2781 |
| Apparent Density | 0.40 | g/cm³ | ASTM D1895B |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 3.5 to 6.5 | g/10 min | ISO 1133 |
| Antioxidant Additive | > 0.15 | % | Internal Method |
| Ash Content | |||
| ES | 0.10 to 0.40 | % | ISO 247 |
| ETM | 4.0 to 6.0 | % | Internal Method |
| Polystyrene Content | 29 to 31 | % | Internal Method |
| Solution Viscosity - (Toluene) 25%wt (25°C) | 1.3 to 1.9 | Pa·s | Internal Method |
| Total Extractables | < 1.0 | % | Internal Method |
| Volatile Matter | < 0.30 | % | Internal Method |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 15 sec, Compression Molded) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1(300% Strain) | 2.90 | MPa | ISO 37 |
| Tensile Strength 2(Yield) | 28.0 | MPa | ISO 37 |
| Tensile Elongation 3(Break) | 800 | % | ISO 37 |
| Note Message | |
|---|---|
| 1 . | Typical properties determined on film cast from toluene solution |
| 2 . | Typical properties determined on film cast from toluene solution |
| 3 . | Typical properties determined on film cast from toluene solution |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SUSTAMID 6 FR | Röchling Sustaplast SE & Co. KG | Nylon 6 | SUSTAMID |
| NORYL™ SE1GFN3 resin | SABIC Innovative Plastics | PPE+PS | NORYL™ |
| Gallonprene® GP310-7003 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Complet® LCF5-LGF15-PP | PlastiComp, Inc. | PP Homopolymer | Complet® |
| Sylvin 802-90 WHITE 1154 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
