Order Products : sales@su-jiao.com

NuSil CV2-2640

Category:	Silicone , Silicone
Manufacturer:	NuSil Technology
Trademark:	NuSil
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Q1Pt8p_NuSil-CV2-2640.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Controlled Volatility (CV) Silicone Materials Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation. Benefits of Silicone Materials for Space Broad Operating Temperature Compensation for CTE Mismatch Protection Against Atomic Oxygen Optically Clear Formulations Flight Legacy Comments: Carbon Black Filled

Message

Controlled Volatility (CV) Silicone Materials

Silicone's ability to remain elastic at low temperatures and resistant to breakdown at high temperatures offer excellent utility in extraterrestrial environments where materials are repeatedly exposed to extreme temperatures. NuSil's Controlled Volatility (CV) and Ultra Low Outgassing TM (SCV) silicone products are used by leading space programs to provide the much-needed resilient protection they require against contamination and material degradation.

Benefits of Silicone Materials for Space

Broad Operating Temperature

Compensation for CTE Mismatch

Protection Against Atomic Oxygen

Optically Clear Formulations

Flight Legacy

Comments: Carbon Black Filled

General Information
Additive	Carbon Black
Features	Electrically Conductive Low to No Outgassing
Uses	Aerospace Applications Electrical/Electronic Applications
Agency Ratings	ASTM E 595 NASA SP-R-0022A

Thermoset	Nominal Value	Unit
Thermoset Components
Part A	Mix Ratio by Weight: 1.0
Part B	Mix Ratio by Weight: 1.0

Additional Information	Nominal Value	Unit
Cure System	Platinum

Uncured Properties	Nominal Value	Unit
Color	Black
Density	1.06	g/cm³
Viscosity
-- ¹	100	Pa·s
-- ²	1300	Pa·s
Curing Time (23°C)	24	hr
Pot Life	60	min

Cured Properties	Nominal Value	Unit
Shore Hardness (Shore A)	30
Tensile Strength	3.45	MPa
Tensile Elongation at Break	350	%
Tear Strength	5.25	kN/m

Note Message
1 .	Part B
2 .	Part A

Resin Grade	Manufacturer	Category	Trademark
Rotec® ABS E/S 200	ROMIRA GmbH	ABS	Rotec® ABS
NaturePlast PEVI 002	NaturePlast	LDPE	NaturePlast
BAAF UHMW-PE M-1	BAAF	HDPE, UHMW	BAAF UHMW-PE
Lucofin® 1451	Lucobit AG	Polyolefin, Unspecified	Lucofin®
Sylvin 6227-95 Purple 8457	Sylvin Technologies Incorporated	PVC, Unspecified	Sylvin