Order Products : sales@su-jiao.com
RTP 100.8 CC
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | RTP Company |
| Trademark: | RTP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PzNvnu_RTP-100-8-CC.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Warning: The status of this material is 'Commercial: Limited Issue' The data for this material has not been recently verified. Please contact RTP Company for current information prior to specifying this grade. |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 0.958 | g/cm³ | ASTM D792 |
| Molding Shrinkage - Flow | ASTM D955 | ||
| 3.18 mm, Injection Molded | 0.80 | % | |
| 6.35 mm, Injection Molded | 1.1 | % | |
| Water Absorption (23°C, 24 hr) | 0.010 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 2760 | MPa | ASTM D638 |
| Tensile Strength | 45.0 | MPa | ASTM D638 |
| Tensile Elongation (Yield, Injection Molded) | 6.0 | % | ASTM D638 |
| Flexural Modulus (Injection Molded) | 2410 | MPa | ASTM D790 |
| Flexural Strength (Injection Molded) | 65.0 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (3.18 mm, Injection Molded) | 53 | J/m | ASTM D256 |
| Unnotched Izod Impact (3.18 mm) | 530 | J/m | ASTM D4812 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load | ASTM D648 | ||
| 0.45 MPa, Unannealed, Injection Molded | 149 | °C | |
| 1.8 MPa, Unannealed, Injection Molded | 110 | °C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 193 to 227 | °C | |
| Middle Temperature | 193 to 227 | °C | |
| Front Temperature | 193 to 227 | °C | |
| Mold Temperature | 32.0 to 66.0 | °C | |
| Injection Pressure | 69.0 to 103 | MPa |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Viprene™ G55A-32U-BLK | Alliance Polymers & Services | TPV | Viprene™ |
| HANWHA LLDPE 3306W | Hanwha Chemical | LLDPE | HANWHA LLDPE |
| Hylon® N1015HLFRA | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
| Leona™ CR103 | Asahi Kasei Chemicals Corporation | Nylon 66 | Leona™ |
| omay® U42B | Suzhou OMAY Optical Materials Co., Ltd | Film, PC | omay® |
