Order Products : sales@su-jiao.com
AMTOPP TL18
| Category: | PP, Unspecified , Polypropylene |
| Manufacturer: | Inteplast Group |
| Trademark: | AMTOPP |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Pyy6GS_AMTOPP-TL18.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Transparent Label BIAXIALLY ORIENTED POLYPROPYLENE FILM NON HEAT-SEALABLE |
| General Information | |
|---|---|
| Uses |
|
| Physical | Nominal Value | Unit | |
|---|---|---|---|
| Dimensional Stability 1 | |||
| Across Flow, 130°C | < 3.0 | % | |
| Flow, 130°C | < 5.0 | % |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Film Thickness - Tested | 18 | µm | |
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 138 | MPa | |
| TD : Yield | 221 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 140 | % | |
| TD : Break | 60 | % | |
| Yield 2 | 62.6 | m²/kg |
| Additional Information | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Surface Energy | ASTM D2578 | ||
| -- 3 | 36 | dyne/cm | |
| -- 4 | 40 | dyne/cm |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Gloss (45°) | 90 | ASTM D2457 | |
| Haze | 1.5 to 3.0 | % | ASTM D1003 |
| Note Message | |
|---|---|
| 1 . | 5 minutes |
| 2 . | Internal Method |
| 3 . | Corona Side |
| 4 . | High Energy Flame Side |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Geon™ CPVC LC500 | PolyOne Corporation | CPVC | Geon™ CPVC |
| HiFill® PP 0121 B | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| OP - Acetal C-Acetal 20PTFE | Oxford Polymers | Acetal (POM) Copolymer | OP - Acetal |
| PENTAMID A GV30 HYD natur | PENTAC Polymer GmbH | Nylon 66 | PENTAMID A |
| Plaslube® PA6/6 CF30 TS12 | Techmer Engineered Solutions | Nylon 66 | Plaslube® |
