Order Products : sales@su-jiao.com
Andur 2-72 DP/Curene® 442
| Category: | PUR-Ether/TDI , Polyurethane (Polyether, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PVcqKS_Andur-2-72-DP-Curene-442.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 2-72DP is a polyether (PTMG) based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 72 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis (orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or by the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.16 | g/cm³ | ASTM D1505 |
| Molding Shrinkage - Flow | 1.1 | % | ASTM D955 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 70 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (100% Strain) | 26.5 | MPa | ASTM D412 |
| Tensile Strength (Yield) | 50.3 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 260 | % | ASTM D412 |
| Compression Set | 36 | % | ASTM D395B |
| Bayshore Resilience | 58 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 2.8 | min | |
| Demold Time (100°C) | 15 | min | |
| Post Cure Time (100°C) | 16 | hr |
| Additional Information |
|---|
| Durometer Hardness, ASTM D2240, Shore D: 67 to 72Die C Tear, ASTM D1004: 700 pliAverage Split Tear, ASTM D1938: 240 pliStoichiometry Curative Level: 95%Mix Temperature: Andur 2-72 DP: 180-212°F Curene 442: 250°F |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Manner Flexible PVC X4768 | Manner Plastics, L.P. | PVC, Flexible | Manner Flexible PVC |
| Sindustris PP R3411 | Sincerity Australia Pty Ltd. | PP, Unspecified | Sindustris PP |
| TUFNYL® RXXIC RED | SRF Ltd. | Nylon 66 | TUFNYL® |
| HiFill® HDPE MM40 | Techmer Engineered Solutions | HDPE | HiFill® |
| Petrothene® GA502119X01 | LyondellBasell Industries | LLDPE | Petrothene® |
