Order Products : sales@su-jiao.com
Lifoflex® UV FLAM 60700
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Müller Kunststoffe GmbH |
| Trademark: | Lifoflex® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PPzxWY_LifoflexUVFLAM60700.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Lifoflex FLAM are a range of halogen-free flame retardant thermoplastic elastomers (TPEs) designed to meet the most demanding applications where resistance to ignition and burning are important features. Lifoflex FLAM compounds contain additives to give them better resistance to burning compared to general TPE grades. The range includes halogen, chlorine and antimony free grades which are low smoke and compliant with the Restriction of Hazardous Substances (RoHS) directives, offering flame retardancy without the use of polybrominated diphenyl ether (PBDE). |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| RoHS Compliance |
|
| UL File Number |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.07 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 3 sec) | 60 | DIN 53505 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress - Across Flow (Yield) | 3.60 | MPa | DIN 53504 |
| Tensile Elongation - Across Flow (Break) | 700 | % | DIN 53504 |
| Compression Set | ISO 815 | ||
| 23°C, 72 hr | 16 | % | ISO 815 |
| 70°C, 22 hr | 36 | % | ISO 815 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (1.50 mm) | V-0 | UL 94 | |
| Glow Wire Ignition Temperature (3.00 mm) | 850 650 | °C | IEC 60695-2-13 |
| Drip Formation 1 | ST2 | DIN 5510-2 | |
| Smoke Formation 2 | SR2 | DIN 5510-2 | |
| Flammability 3 | S3 | DIN 5510-2 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 80.0 | °C | |
| Drying Time | 2.0 - 3.0 | hr | |
| Rear Temperature | 170 - 180 | °C | |
| Middle Temperature | 180 - 190 | °C | |
| Front Temperature | 190 - 200 | °C | |
| Nozzle Temperature | 200 - 210 | °C | |
| Mold Temperature | 15.0 - 50.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 150 - 160 | °C | |
| Cylinder Zone 2 Temp. | 160 - 170 | °C | |
| Cylinder Zone 3 Temp. | 170 - 180 | °C | |
| Cylinder Zone 4 Temp. | 180 - 190 | °C | |
| Die Temperature | 180 - 200 | °C |
| Note Message | |
|---|---|
| 1 . | 500x10x6mm |
| 2 . | 500x10x6mm |
| 3 . | 500x10x6mm |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TES J-71/20/VO/ND | Techmer Engineered Solutions | Nylon+SAN | TES |
| TOTAL Polypropylene PPH 5060 | TOTAL Refining & Chemicals | PP Homopolymer | TOTAL Polypropylene |
| Arnite® AV2 360 S | DSM Engineering Plastics | PET | Arnite® |
| HiFill® PP TM20 FR-2 | Techmer Engineered Solutions | PP, Unspecified | HiFill® |
| Kumho SAN SAN 315TR | Korea Kumho Petrochemical Co., Ltd. | SAN | Kumho SAN |
