Order Products : sales@su-jiao.com
IsoFil® MG-2
| Category: | PUR-MDI , Polyurethane (MDI) |
| Manufacturer: | Pathway Polymers |
| Trademark: | IsoFil® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PGGg9Z_IsoFil-MG-2.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IsoFil® is a two-component system consisting of Catalyst blend (side A) and Prepolymer (side B). It is designed to be used where high level of mechanical properties of cured material is desired. |
| General Information | |
|---|---|
| Appearance |
|
| Forms |
|
| Hardness | Nominal Value | ||
|---|---|---|---|
| Durometer Hardness (Shore A) | 24 to 28 |
| Elastomers | Nominal Value | Unit | |
|---|---|---|---|
| Tensile Strength (Break) | 2.36 | MPa | |
| Tensile Elongation (Break) | 300 | % | |
| Tear Strength | |||
| -- 1 | 12.5 | kN/m | |
| Split | 1.2 | kN/m | |
| Bayshore Resilience | 72 | % |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Shelf Life | 26 | wk | |
| Thermoset Mix Viscosity | |||
| 25°C 2 | 420 | cP | |
| 25°C 3 | 350 | cP | |
| Gel Time | 25.0 to 30.0 | min |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Cure Time (25°C) | 2.0 | day | |
| Mixing Ratio | |||
| -- 4 | 101:100 | ||
| -- 5 | 100:100 | ||
| Processing Temperature 6 | 21 to 27 | °C |
| Fill Analysis | Nominal Value | Unit | |
|---|---|---|---|
| Melt Density | |||
| 25°C 7 | 1.06 | g/cm³ | |
| 25°C 8 | 1.05 | g/cm³ |
| Note Message | |
|---|---|
| 1 . | Die C |
| 2 . | Prepolymer (side B) |
| 3 . | Catalyst (side A) |
| 4 . | by weight (±5%) |
| 5 . | by volume (±5%) |
| 6 . | for both Catalyst (side A) & Prepolymer (side B) |
| 7 . | Prepolymer (side B) |
| 8 . | Catalyst (side A) |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TECHNYL® C 246SI V30 NATURAL | Solvay Engineering Plastics | Nylon 6 | TECHNYL® C |
| ESTASTIR HI 1012 | Cossa Polimeri S.r.l. | PS (GPPS) | ESTASTIR |
| FPD Blue™ 707 | Greene, Tweed & Co. | Fluorelastomer | FPD Blue™ |
| ISOTHANE® 1085A-E | Great Eastern Resins Industrial Co Ltd (GRECO) | TPU-Polyester | ISOTHANE® |
| OTECH PVC OW134 - Automotive Jacket | OTECH Corporation | PVC, Unspecified | OTECH PVC |
