Order Products : sales@su-jiao.com
Andur 7 DPLM
| Category: | PUR-Ester/TDI , Polyurethane (Polyester, TDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | PFAhlo_Andur-7-DPLM.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur 7-DP-LM is a polyester based liquid, toluene diisocyanate terminated prepolymer. An elastomer with a hardness of 70 to 72 Shore D is obtained when this prepolymer is cured with Curene 442 [4,4'-methylene-bis(orthochloroaniline)]. Elastomers of lower hardness can be obtained by reaction with various polyols and their combination with Curene 442 and other diamines, or through the use of plasticizers. |
| General Information | |
|---|---|
| Forms |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.21 | g/cm³ | ASTM D792 |
| Thermoset | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Thermoset Mix Viscosity | ASTM D2393 | ||
| 70°C | 1750 | cP | ASTM D2393 |
| 100°C | 400 | cP | ASTM D2393 |
| Additional Information |
|---|
| NCO: 7.3 to 7.7%Specific Gravity, ASTM D792, 77°F: 1.21 g/mlSpecific Gravity, ASTM D792, 212°F: 1.16 g/ml |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 900 P-1720 | RTP Company | PSU | RTP |
| Next PMMA AX-01RD.(MH-4152) | Next Polymers Ltd. | Acrylic (PMMA) | Next PMMA |
| Celcon® GB25 | Celanese Corporation | Acetal (POM) Copolymer | Celcon® |
| Kingfa PA66-R0N | Kingfa | Nylon 66 | Kingfa |
| Hylon® N1230HL | Ravago Manufacturing Americas, LLC | Nylon 66 | Hylon® |
