Order Products : sales@su-jiao.com
COBITECH 0
| Category: | PET , Polyethylene Terephthalate |
| Manufacturer: | M&G Gruppo Mossi & Ghisolfi |
| Trademark: | COBITECH |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | ASW5mR_COBITECH-0.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| COBITECH 0 resin is a PET homopolymer, based on terephthalic acid. Its high melt strength make it well suited for the production of expanded sheets, boards, panels, profiles and beads. Foam sheet can be thermoformed. After crystallization the foamed products can withstand temperature exceeding 200°C (390 °F) for short time and are susceptible to mechanical finishing. Scraps of foamed products obtained by COBITECH 0 can be re-used in extrusion without significant I.V. loss. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Density | 0.88 | g/cm³ | ASTM D1895 |
| Melt Mass-Flow Rate (MFR) | 15 | g/10 min | ASTM D1238 |
| Thermal | Nominal Value | Unit | |
|---|---|---|---|
| Melting Temperature | 257 | °C |
| Additional Information |
|---|
| Intrinsic viscosity (.V.), C. 01/F, +/- 0.100: 1.25 dl/gCrystalline Density, C.04, +/- 0.1: 1.4 g/milMelt Flow Index, C17, +/- 3: 14.5 g/10minColor (b value), C.09: +2 Max.Melting point, MGPI 007, +/- 2: 257°CBulk Density, C16, +/- 5%: 880 Kg/m³ |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sekisui PVC HA-27F | Sekisui (Hong Kong) Limited | PVC, Unspecified | Sekisui PVC |
| Witcom PA66 4L1 | Witcom Engineering Plastics B.V. | Nylon 66 | Witcom PA66 |
| Clariant Nylon 6/6 6604G33-L | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| DJSilicone NE-9160 | DONGJUE SILICONE (NANJING) CO., LTD | Silicone | DJSilicone |
| Celstran® PBT-GF40-08 | Celanese Corporation | PBT | Celstran® |
