Order Products : sales@su-jiao.com
SureSpec IP-020NB
| Category: | PP Impact Copolymer , Polypropylene Impact Copolymer |
| Manufacturer: | Genesis Polymers |
| Trademark: | SureSpec |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Oldo6I_SureSpec-IP-020NB.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| IP-020NB is a nucleated Polypropylene blow molding no break certified prime resin developed for Extra High Izod Impact containers produced by Thermoforming, Extrusion-Blow or Injection-Blow molding equipment. IP-020NB has high melt strength offering optimized melt stability for consistent, easy processability, and Very Good Low Temperature Drop Impact resistance. IP-020NB complies with FDA regulation 21CFR 177.1520 (a)(3)(i) (c)3.1+3.2, and most international regulations concerning Polypropylene use in contact with food. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.902 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 2.0 | g/10 min | ASTM D1238 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Rockwell Hardness (R-Scale) | 82 | ASTM D785 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength 1(Yield) | 29.6 | MPa | ASTM D638 |
| Tensile Elongation 2(Yield) | 9.0 | % | ASTM D638 |
| Flexural Modulus - 1% Secant 3 | 1240 | MPa | ASTM D790 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact | No Break | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (0.45 MPa, Unannealed) | 88.0 | °C | ASTM D648 |
| Note Message | |
|---|---|
| 1 . | 50 mm/min |
| 2 . | 50 mm/min |
| 3 . | 1.3 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TAIRIPRO K1035 | Formosa Plastics Corporation | PP Homopolymer | TAIRIPRO |
| ALCUDIA® LDPE PE-063/A | REPSOL | LDPE | ALCUDIA® LDPE |
| Elastollan® 1164 D 10 | BASF Polyurethanes GmbH | TPU-Polyether | Elastollan® |
| Mafill® CR HC 5941 | Ravago Group | PP Homopolymer | Mafill® |
| Romiloy® 1035/07 GF10 | ROMIRA GmbH | PC+ABS | Romiloy® |
