Order Products : sales@su-jiao.com

Marlex® 9005

Category:	HDPE , High Density Polyethylene
Manufacturer:	Chevron Phillips Chemical Company LLC
Trademark:	Marlex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	NfyiFY_Marlex-9005.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

WECHAT

Message

Marlex® 9005 is a High Density Polyethylene material. It is available in Latin America or North America for extrusion or injection molding.

Important attributes of Marlex® 9005 are:

Flame Rated

Eco-Friendly/Green

Food Contact Acceptable

Hexene Comonomer

High ESCR (Stress Crack Resistant)

Typical applications include:

Containers

Agricultural

Food Contact Applications

Industrial Applications

Seating

General Information
Features	Durable Food Contact Acceptable Good Impact Resistance Hexene Comonomer High ESCR (Stress Crack Resist.) Low Warpage Medium Flow Recyclable Material
Uses	Agricultural Applications Containers Food Containers Industrial Applications Seats
Agency Ratings	ASTM D 4976-PE233 FDA 21 CFR 177.1520(c) 3.2a
UL File Number	E54700
Forms	Pellets
Processing Method	Extrusion Injection Molding

Physical	Nominal Value	Unit	Test Method
Density	0.945	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	6.0	g/10 min	ASTM D1238
Environmental Stress-Cracking Resistance (100% Igepal, Compression Molded, F50)	90.0	hr	ASTM D1693B

Hardness	Nominal Value	Unit	Test Method
Durometer Hardness (Shore D, Compression Molded)	62		ASTM D2240

Mechanical	Nominal Value	Unit	Test Method
Tensile Strength ¹(Yield, Compression Molded)	23.0	MPa	ASTM D638
Tensile Elongation ²(Break, Compression Molded)	1000	%	ASTM D638
Flexural Modulus - Tangent ³(Compression Molded)	1070	MPa	ASTM D790

Thermal	Nominal Value	Unit	Test Method
Brittleness Temperature	< -75.0	°C	ASTM D746A
Vicat Softening Temperature	121	°C	ASTM D1525 ⁴

Flammability	Nominal Value		Test Method
Flame Rating	HB		UL 94

Note Message
1 .	Type IV, 51 mm/min
2 .	Type IV, 51 mm/min
3 .	13 mm/min
4 .	Rate A (50°C/h), Loading 1 (10 N)

Resin Grade	Manufacturer	Category	Trademark
Tecodur® PB70 NL SV20	Eurotec Engineering Plastics	PBT	Tecodur®
Arlon® 1263	Greene, Tweed & Co.	PEEK	Arlon®
DILAMID® 66 NATURAL	Dilaplast S.p.A.	Nylon 66	DILAMID®
ESTOPLAST EP 4030WW20	Ester Industries Ltd.	PBT	ESTOPLAST EP
Pujie CPE-135C	Zhanhua Pujie Chemical Technology Co.,Ltd	CPE	Pujie