Order Products : sales@su-jiao.com
SumiDurez 156
| Category: | Phenolic , Phenolic |
| Manufacturer: | SumiDurez Singapore Pte Ltd |
| Trademark: | SumiDurez |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | NU9oGc_SumiDurez-156.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
156 Phenolic is a two-stage, asbestos-free, heat resistant / electrical molding material. It exhibits excellent dimensional stability, high heat resistance, good molded appearance, and UL flammability rating. Typical applications include automotive carburetor spacers, sealing rings, thrust washers, speedometer sleeves, appliance terminals, probe controls, insulators, light baffles, etc. ASTM Type 13 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.56 | g/cm³ | ASTM D792 |
| Apparent Density | 0.59 | g/cm³ | ASTM D1895 |
| Bulk Factor | 2.7 | ASTM D1895 | |
| Molding Shrinkage - Flow (Compression Molded) | 0.40 to 0.80 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.30 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Compression Molded) | 10300 | MPa | ASTM D638 |
| Tensile Strength (Yield, Compression Molded) | 48.3 | MPa | ASTM D638 |
| Flexural Strength (Compression Molded) | 72.4 | MPa | ASTM D790 |
| Compressive Strength | 193 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 16 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 191 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | 12 | kV/mm | ASTM D149 |
| Comparative Tracking Index (CTI) | 180 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.02 mm | V-1 | ||
| 1.47 mm | V-0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Maxxam™ PPH-20G Nat | PolyOne Corporation | PP Homopolymer | Maxxam™ |
| Propilven B-325 | Propilven, S.A. | PP Random Copolymer | Propilven |
| Petrotene® PP A3 G15 NTLA010 PH307 | Petropol Industry and Trade of Polymers LTDA | PP, Unspecified | Petrotene® PP |
| Plexiglas® SG10 | Altuglas International of Arkema Inc. | Acrylic (PMMA) | Plexiglas® |
| CABELEC® CC6135 | Cabot Corporation | PS (GPPS) | CABELEC® |
