Category: | TPO (POE) , Thermoplastic Polyolefin Elastomer |
Manufacturer: | LyondellBasell Industries |
Trademark: | Hifax |
Fillers: | - |
Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
Delivery Terms | FOB, CIF, DAP, DAT, DDP |
PDF: | Mu5YDL_Hifax-BR1149AC.pdf ![]() |
PRICE: | Order Products email sales@su-jiao.com |
Message |
---|
Hifax BR1149AC very high melt flow, 2,400 MPa flexural modulus, precolored, mineral-filled, low CLTE thermoplastic elastomeric olefin (TEO) resin has an excellent balance of properties. It was designed primarily for body side moldings that require good dimensional stability. |
General Information | |
---|---|
Filler / Reinforcement |
|
Features |
|
Uses |
|
Appearance |
|
Forms |
|
Processing Method |
|
Physical | Nominal Value | Unit | Test Method |
---|---|---|---|
Density | 1.14 | g/cm³ | ISO 1183 |
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg) | 30 | g/10 min | ASTM D1238, ISO 1133 |
Mechanical | Nominal Value | Unit | Test Method |
---|---|---|---|
Tensile Stress (Yield) | 17.0 | MPa | ISO 527-2 |
Tensile Strain (Yield) | 8.0 | % | ISO 527-2 |
Flexural Modulus | 2400 | MPa | ISO 178 |
Impact | Nominal Value | Unit | Test Method |
---|---|---|---|
Notched Izod Impact Strength (23°C) | 30 | kJ/m² | ISO 180 |
Thermal | Nominal Value | Unit | Test Method |
---|---|---|---|
Heat Deflection Temperature | |||
0.45 MPa, Unannealed | 101 | °C | ISO 75-2/B |
1.8 MPa, Unannealed | 61.0 | °C | ISO 75-2/A |
CLTE - Flow (-30 to 100°C) | 4.0E-5 | cm/cm/°C | ASTM E228, ISO 11359-2 |
Resin Grade | Manufacturer | Category | Trademark |
---|---|---|---|
Marlex® K608 | Chevron Phillips Chemical Company LLC | HDPE, HMW | Marlex® |
Tempalux® 20% GF | Westlake Plastics Company | PEI | Tempalux® |
POLYblend PC/ABS 45FS GKF2505 | Polykemi AB | PC+ABS | POLYblend |
Sylvin 8250-80FUV Natural | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
Zetpol® 2000 | Zeon Corporation | NBR | Zetpol® |