Order Products : sales@su-jiao.com
Bormed™ HE9621-PH
| Category: | HDPE , High Density Polyethylene |
| Manufacturer: | Borealis AG |
| Trademark: | Bormed™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | hQUDgP_Bormed-HE9621-PH.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Bormed HE9621-PH is a resin intended for evaluation for use in Healthcare applications. Bormed HE9621-PH is a high density polyethylene with narrow molecular weight distribution typically used in injection moulding of articles requiring medium flow with high rigidity. This grade is designed for articles which require high stiffness and low warpage. Material can be sterilised with ethylene oxide, steam and radiation up to 35 kGy; as a result of sterilisation by radiation some minor yellowing can occur. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.962 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 12 | g/10 min | ISO 1133 |
| Molding Shrinkage | 1.0 - 2.0 | % |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D) | 62 | ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Injection Molded) | 1150 | MPa | ISO 527-2/1 |
| Tensile Stress (Yield, Injection Molded) | 26.0 | MPa | ISO 527-2/50 |
| Tensile Strain (Yield, Injection Molded) | 9.0 | % | ISO 527-2/50 |
| Flexural Modulus | 1300 | MPa | ISO 178 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength | 4.0 | kJ/m² | ISO 179/1eA |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature 1(0.45 MPa, Unannealed) | 73.0 | °C | ISO 75-2/B |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Processing (Melt) Temp | 200 - 260 | °C | |
| Mold Temperature | 10.0 - 40.0 | °C | |
| Injection Rate | Fast |
| Injection instructions |
|---|
| Holding pressure: as low as possible |
| Note Message | |
|---|---|
| 1 . | Injection Molded |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Nanjing Hongrui PA66 A333 | Nanjing Hongrui Engineering Plastics Co., Ltd. | Nylon 66 | Nanjing Hongrui PA66 |
| Nypol® PA A3 HL CNZ0317 NR413 | Petropol Industry and Trade of Polymers LTDA | Nylon 66 | Nypol® PA |
| Axiall PVC 6704 | Axiall Corporation | PVC, Flexible | Axiall PVC |
| Hanwha Total PE R908P | HANWHA TOTAL PETROCHEMICALS Co., Ltd. | HDPE | Hanwha Total PE |
| HiFill® PA6 GF34 IM HS | Techmer Engineered Solutions | Nylon 6 | HiFill® |
