Order Products : sales@su-jiao.com
Bakelite® PF 7596
| Category: | Phenolic , Phenolic |
| Manufacturer: | Hexion Inc. |
| Trademark: | Bakelite® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MtIPOQ_Bakelite-PF-7596.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Product Description Phenolic moulding compound, inorganically/organically filled, modified with graphite, good heat conductivity, good sliding properties (not suitable for use of higher voltage) Application Areas Bearers for grinding disc centers, pump parts, sliding/guiding elements, glide bearing parts |
| General Information | |
|---|---|
| Filler / Reinforcement |
|
| Features |
|
| Uses |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density (23°C) | 1.64 | g/cm³ | ISO 1183 |
| Apparent Density | 0.73 | g/cm³ | ISO 60 |
| Molding Shrinkage 1 | 0.30 | % | ISO 2577 |
| Water Absorption - 24h/23C | 8.0 | mg | ISO 62 |
| Post Shrinkage 2 | 0.10 | % | ISO 2577 |
| Additional Information | Nominal Value | Unit | |
|---|---|---|---|
| Compression Molding Molding Pressure | > 15.0 | MPa | |
| Compression Molding Temperature | 160 to 190 | °C |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus | 16000 | MPa | ISO 527-2/1 |
| Tensile Stress | 60.0 | MPa | ISO 527-2/5 |
| Flexural Modulus | 14000 | MPa | ISO 178 |
| Flexural Stress 3 | 100 | MPa | ISO 178 |
| Compressive Stress | 250 | MPa | ISO 604 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Unnotched Impact Strength (23°C) | 5.0 | kJ/m² | ISO 179/1eU |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Heat Deflection Temperature (8.0 MPa, Unannealed) | 175 | °C | ISO 75-2/C |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Rear Temperature | 60.0 to 75.0 | °C | |
| Nozzle Temperature | 80.0 to 100 | °C | |
| Processing (Melt) Temp | 80.0 to 100 | °C | |
| Mold Temperature | 160 to 190 | °C | |
| Injection Pressure | > 15.0 | MPa | |
| Back Pressure | 0.500 to 2.00 | MPa |
| Note Message | |
|---|---|
| 1 . | Injection |
| 2 . | Injection |
| 3 . | 2.0 mm/min |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| TEDUR® L FC 9510-5 | ALBIS PLASTIC GmbH | PPS | TEDUR® |
| Bayflex® 110-50 (24% Mineral) | Covestro - PUR | PUR-Ether/MDI | Bayflex® |
| Bergamid™ B70 G30 black VN8115CF LT | PolyOne Corporation | Nylon 6 | Bergamid™ |
| Sarlink® TPE ML-1140DN NAT (PRELIMINARY DATA) | Teknor Apex Company | TPE | Sarlink® TPE |
| Bayblend® W90 XG | Covestro - Polycarbonates | ASA+PC | Bayblend® |
