Order Products : sales@su-jiao.com
Andur M-10 (C-92)
| Category: | PUR-Ether/MDI , Polyurethane (Polyether, MDI) |
| Manufacturer: | Anderson Development Company |
| Trademark: | Andur |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | MqW4Yb_Andur-M-10-C-92-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Andur M-10 is an MDI-polyether prepolymer that, when processed with close attention to handling procedures and formulation, produces high quality elastomers. These ether based prepolymers perform well in dynamic applications, and depending on the curative selected, can be processed to a variety of hardnesses, physical properties and resilience. |
| General Information | |
|---|---|
| Features |
|
| Forms |
|
| Hardness | Nominal Value | Test Method | |
|---|---|---|---|
| Durometer Hardness (Shore A) | 92 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (Yield) | 31.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 500 | % | ASTM D412 |
| Compression Set | 30 | % | ASTM D395 |
| Bayshore Resilience | 60 | % | ASTM D2632 |
| Thermoset | Nominal Value | Unit | |
|---|---|---|---|
| Pot Life | 2.5 | min | |
| Demold Time | 15 | min |
| Additional Information |
|---|
| Average Split Tear, ASTM D1938: 150 pliParts of curative per 100 parts Andur M-10, 14.4% NCO: 73.55 parts by weightParts of curative per 100 parts Andur M-10, 14.45% NCO: 73.8 parts by weightParts of curative per 100 parts Andur M-10, 14.5% NCO: 74.06 parts by weightParts of curative per 100 parts Andur M-10, 14.55% NCO: 74.32 parts by weightParts of curative per 100 parts Andur M-10, 14.6% NCO: 74.57 parts by weightParts of curative per 100 parts Andur M-10, 14.65% NCO: 74.83 parts by weightParts of curative per 100 parts Andur M-10, 14.7% NCO: 75.08 parts by weightParts of curative per 100 parts Andur M-10, 14.75% NCO: 75.34 parts by weightParts of curative per 100 parts Andur M-10, 14.8% NCO: 75.59 parts by weightParts of curative per 100 parts Andur M-10, 14.85% NCO: 75.85 parts by weightParts of curative per 100 parts Andur M-10, 14.9% NCO: 76.1 parts by weightParts of curative per 100 parts Andur M-10, 14.95% NCO: 76.36 parts by weightParts of curative per 100 parts Andur M-10, 15% NCO: 76.61 parts by weightMix Temperature: Andur M-10: 167°F Curative C-92: 212°F |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Mold Temperature | 60.0 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| BUP 621 | Bonyan Kala Chemie Company | Polyester, TS | BUP |
| Gallonprene® GP420-7503 | Shenzhen Sungallon Rubber & Plastic Corporation Limited | TPE | Gallonprene® |
| Glastic® 1580 | Glastic Corporation | Polyester, TS | Glastic® |
| HiFill® PA4/6 GF40 HS | Techmer Engineered Solutions | Nylon 46 | HiFill® |
| Lifoflex® UVX 27.01 B038-5 | ELASTO | TPE | Lifoflex® |
