Order Products : sales@su-jiao.com
POLYCOMPO PE F9673P
| Category: | LDPE , Low Density Polyethylene |
| Manufacturer: | POLYCOMPO Co.,Ltd. |
| Trademark: | POLYCOMPO PE |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | M65lOv_POLYCOMPO-PE-F9673P.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| POLYCOMPO PE F9673P is a Low Density Polyethylene product. It can be processed by blown film and is available in Asia Pacific. Typical application: Packaging. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.918 | g/cm³ | ISO 1183 |
| Melt Mass-Flow Rate (MFR) | 1.1 | g/10 min | ISO 1133 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore D, Injection Molded) | 51 | ASTM D2240, ISO 868 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Break, Injection Molded) | 26.0 | MPa | ISO 527-2 |
| Tensile Strain (Break, Injection Molded) | 130 | % | ISO 527-2 |
| Flexural Modulus (Injection Molded) | 170 | MPa | ISO 178 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Vicat Softening Temperature | 91.0 | °C | ASTM D1525, ISO 306 |
| Peak Crystallization Temperature (DSC) | 108 | °C | ASTM D3418, ISO 3146 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| ADMER™ NF498A | Mitsui Chemicals America, Inc. | PE, Unspecified | ADMER™ |
| Bergamid™ A70 G33 TM-X BK079 | PolyOne Corporation | Nylon 66 | Bergamid™ |
| DENISAB 2010 | Vamp Tech | ABS | DENISAB |
| LNP™ THERMOCOMP™ RF0069SZ compound | SABIC Innovative Plastics Asia Pacific | Nylon 66 | LNP™ THERMOCOMP™ |
| ULTEM™ 2310R resin | SABIC Innovative Plastics | PEI | ULTEM™ |
