Order Products : sales@su-jiao.com
Monprene® RG-20180 X (PRELIMINARY DATA)
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | Teknor Apex Company |
| Trademark: | Monprene® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Lu4YR7_Monprene-RG-20180-X-PRELIMINARY-DATA-.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Monprene RG-20180 is specifically designed for regulated applications including food contact, toys, and children's products. This grade is suitable for extrusion. Monprene RG-20180 complies with various US FDA and European regulations and directives for food contact and toy safety. Please contact Teknor Apex for a regulatory compliance letter. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.888 | g/cm³ | ISO 1183 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A, 5 sec) | 80 | ISO 868 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress 1 | ISO 37 | ||
| Transverse flow : 100% strain | 2.80 | MPa | ISO 37 |
| Flow : 100% strain | 6.00 | MPa | ISO 37 |
| Tensile Stress 2 | ISO 37 | ||
| Transverse flow : Fracture | 12.0 | MPa | ISO 37 |
| Flow : Fracture | 7.00 | MPa | ISO 37 |
| Tensile Elongation 3 | ISO 37 | ||
| Transverse flow : Fracture | 780 | % | ISO 37 |
| Flow : Fracture | 250 | % | ISO 37 |
| Compression Set 4 | ISO 815 | ||
| 23°C, 22 hr | 23 | % | ISO 815 |
| 70°C, 22 hr | 35 | % | ISO 815 |
| Fill Analysis | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Apparent Viscosity (200°C, 206 sec^-1) | 303 | Pa·s | ASTM D3835 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 149 - 160 | °C | |
| Cylinder Zone 2 Temp. | 160 - 204 | °C | |
| Cylinder Zone 3 Temp. | 171 - 216 | °C | |
| Cylinder Zone 4 Temp. | 182 - 227 | °C | |
| Die Temperature | 182 - 227 | °C |
| Extrusion instructions |
|---|
| Screw Speed: 30 to 100 rpmDrying is not necessary. However, if moisture is a problem, dry the pellets for 2 to 4 hours at 150F (65C). |
| Note Message | |
|---|---|
| 1 . | Type 1, 510mm/min |
| 2 . | Type 1, 510mm/min |
| 3 . | Type 1, 510mm/min |
| 4 . | Type a |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Tislamid® PA66 PA66 25 GBR | Tisan | Nylon 66 | Tislamid® PA66 |
| Nylene® 600 | Custom Resins Group | Nylon 6 | Nylene® |
| DENYL 6 5010 | Vamp Tech | Nylon 6 | DENYL |
| Delta ATR-1TF40 | Delta Polymers | Acetal (POM) Homopolymer | Delta |
| Jampilen HP554N | Jam Polypropylene Company | PP Homopolymer | Jampilen |
