Order Products : sales@su-jiao.com
Premier LH01019 - BO
| Category: | LLDPE , Linear Low Density Polyethylene |
| Manufacturer: | Premier Polymers, LLC. |
| Trademark: | Premier |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | TlT7Bw_Premier-LH01019---BO.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Premier LH01019 is a hexene linear low density polyethylene resin, designed for film applications requiring toughness and strength. Meets all requirements of the U.S. Food and Drug Administration as specified in 21 CFR 177.1520, covering safe use of polyolefin articles intended for direct food contact. |
| General Information | |
|---|---|
| Additive |
|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 0.919 | g/cm³ | ASTM D1505 |
| Melt Mass-Flow Rate (MFR) (190°C/2.16 kg) | 1.0 | g/10 min | ASTM D1238 |
| Films | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength | ASTM D882 | ||
| MD : Yield | 10.3 | MPa | |
| TD : Yield | 10.3 | MPa | |
| MD : Break | 37.9 | MPa | |
| TD : Break | 31.0 | MPa | |
| Tensile Elongation | ASTM D882 | ||
| MD : Break | 600 | % | |
| TD : Break | 850 | % | |
| Dart Drop Impact | 180 | g | ASTM D1709A |
| Elmendorf Tear Strength | ASTM D1922 | ||
| MD | 400 | g | |
| TD | 650 | g |
| Optical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Haze | 17 | % | ASTM D1003 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| SABIC® PP 527K | Saudi Basic Industries Corporation (SABIC) | PP Homopolymer | SABIC® PP |
| Mirakutoran® TPU E995 | Japan Mirakutoran Inc. | TPU Alloy | Mirakutoran® TPU |
| Tenac™-C ZLV40 | Asahi Kasei Chemicals Corporation | Acetal (POM) Copolymer | Tenac™-C |
| Spartech Polycom PP7215 G41 | Spartech Polycom | PP Copolymer | Spartech |
| VITAMIDE® AO3XBK6569 | Jackdaw Polymers | Nylon 66 | VITAMIDE® |
