Order Products : sales@su-jiao.com
3M™ Dyneon™ Fluoroelastomer FX 11818
| Category: | Fluorelastomer , Fluoroelastomer |
| Manufacturer: | 3M Advanced Materials Division |
| Trademark: | 3M™ Dyneon™ Fluoroelastomer |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LGugTL_3M-Dyneon-Fluoroelastomer-FX-11818.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| 3M™ Dyneon™ Flouroelastomer FX 11818 can be compounded using standard water cooled internal mixers or two-roll mills with standard fillers and ingredients utilized in typical fluoroelastomer formulations. The "dry" ingredients should be blended before adding to the masticated gum. For best results, Dyneon FX 11818 should be banded on the mill several minutes prior to adding the blended dry ingredients. Once mixed, the compounded stocks have good scorch resistance and storage stability. |
| General Information |
|---|
| Additives Physical | Nominal Value | Unit | |
|---|---|---|---|
| Density | 1.86 | g/cm³ | |
| State at Room Temperature | Solid |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RheTech Polypropylene GC10P200-767UVBG | RheTech, Inc. | PP Copolymer | RheTech Polypropylene |
| STERalloy™ FDG 2781 | Hapco Inc. | TP, Unspecified | STERalloy™ FDG |
| DINALON® A1S25 G30 | Grupo Repol | Nylon 66 | DINALON® |
| Elastollan® B 64 D | BASF Polyurethanes GmbH | TPU-Polyester | Elastollan® |
| HiFill® PA6 IM 40 Z | Techmer Engineered Solutions | Nylon 6 | HiFill® |
