Order Products : sales@su-jiao.com
EvoSource™ PS 3122 E
| Category: | PS (GPPS) , General Purpose Polystyrene |
| Manufacturer: | MBA Polymers |
| Trademark: | EvoSource™ |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | LD9Ggk_EvoSource-PS-3122-E.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| A post-consumer recycled polystyrene, suitable for injection molding and often used for extrusion applications. Available in light grey(reference 90/02) and signal grey (reference 70/04). |
| General Information | |
|---|---|
| Recycled Content |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.05 | g/cm³ | Internal Method |
| Melt Mass-Flow Rate (MFR) (200°C/5.0 kg) | 6.5 | g/10 min | ISO 1133 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress (Yield, 23°C) | 23.0 | MPa | ISO 527-2/50 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Charpy Notched Impact Strength (23°C) | 8.0 | kJ/m² | ISO 179/1eA |
| Notched Izod Impact Strength (23°C) | 8.0 | kJ/m² | ISO 180/1A |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Suggested Max Moisture | 0.050 to 0.10 | % | |
| Processing (Melt) Temp | 190 to 230 | °C | |
| Mold Temperature | 20.0 to 60.0 | °C |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 70.0 | °C | |
| Drying Time | 1.0 to 2.0 | hr | |
| Suggested Max Moisture | 0.050 to 0.10 | % | |
| Melt Temperature | 180 to 210 | °C |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Ebalta MG 804 / MG 804-1 | Ebalta Kunststoff GmbH | PUR, Unspecified | Ebalta |
| Hifax HSBM CB 1159 G | LyondellBasell Industries | PP Impact Copolymer | Hifax |
| Hifax TYC 1168X | LyondellBasell Industries | Polyolefin, Unspecified | Hifax |
| PLUSTEK PA301G7 | Polyram Ram-On Industries | Nylon 66 | PLUSTEK |
| Sumiliteresin® PR-FTZ-15 | SBHPP | Phenolic | Sumiliteresin® |
