Order Products : sales@su-jiao.com

POYAD VM111

Category:	PP, Unspecified , Polypropylene
Manufacturer:	Pooya Polymer Tehran
Trademark:	POYAD
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	L9Xzov_POYAD-VM111.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Viscosity Modifier MB Description POYAD VM111 is a PP based concentrate contains a special viscosity modifier agent that reduce melt viscosity of polypropylene meanwhile narrow the molecular weight distribution. POYAD VM111 is only applicable in PP based processing that need high melt flow rate such as In Mold Labeled parts (IML) and Melt Blown Fibers. Application POYAD VM111 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending. Depending on the application, type of base resin and process condition it can be used from 0.5 to 2%. A study shows using 0.5% of POYAD VM111 increasing MFI more than 4 times and rising dosage to 1%, increases MFI up to 6 times. The effect depends on initial MFI, process temperature and existence of other chemicals. It should be stored in a dry and cool place (max 25°C) not to exceed 6 months.

Message

Viscosity Modifier MB

Description
POYAD VM111 is a PP based concentrate contains a special viscosity modifier agent that reduce melt viscosity of polypropylene meanwhile narrow the molecular weight distribution.
POYAD VM111 is only applicable in PP based processing that need high melt flow rate such as In Mold Labeled parts (IML) and Melt Blown Fibers.

Application
POYAD VM111 is designed for ease of dilution and homogeneous mixing and is therefore suitable for direct addition using automatic dosing units or by pre-blending.
Depending on the application, type of base resin and process condition it can be used from 0.5 to 2%.
A study shows using 0.5% of POYAD VM111 increasing MFI more than 4 times and rising dosage to 1%, increases MFI up to 6 times. The effect depends on initial MFI, process temperature and existence of other chemicals.
It should be stored in a dry and cool place (max 25°C) not to exceed 6 months.

General Information
Additive	Unspecified Additive
Uses	Masterbatch
Appearance	Yellow
Forms	Pellets

Physical	Nominal Value	Unit	Test Method
Density	0.910	g/cm³	ASTM D1505
Melt Mass-Flow Rate (MFR) (230°C/2.16 kg)	4.0 to 6.0	g/10 min	ASTM D1238
Moisture Content	< 1000	ppm	ASTM D644

Additional Information	Nominal Value	Unit	Test Method
Dispersion	OK		Internal Method
Pellet Size	30.0 to 40.0	pcs/cm³	Internal Method

Resin Grade	Manufacturer	Category	Trademark
RTP EMI 2561 HF	RTP Company	PC+ABS	RTP
Badamid® A70 H	Bada AG	Nylon 66	Badamid®
LNP™ LUBRICOMP™ UCP36S compound	SABIC Innovative Plastics	PPA	LNP™ LUBRICOMP™
LUVOCOM® 1-1111 VP	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®
OnFlex™ S EH 60A-3S7003	PolyOne Corporation	TPE	OnFlex™