Order Products : sales@su-jiao.com
Garaflex™ O 9940SA NAT
| Category: | TPE , Thermoplastic Elastomer |
| Manufacturer: | AlphaGary |
| Trademark: | Garaflex™ O |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | L8CkyB_Garaflex-O-9940SA-NAT.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| GARAFLEX-O 9940SA IS A PBB, PBBE and PBBO FREE, 105°C RATED, RoHS COMPLIANT, FLAME RETARDED OLEFINIC THERMOPLASTIC ELASTOMER INTENDED FOR FLAT RIBBON CABLE PRIMARY AND HEAT TRACING CABLE |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| RoHS Compliance |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.28 - 1.32 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness | ASTM D2240 | ||
| Shaw D | 48 - 54 | ASTM D2240 | |
| Shaw D, 15 seconds | 40 - 46 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Strength (0.762 mm) | 13.8 | MPa | ASTM D412 |
| Tensile Elongation (Break, 0.762 mm) | 500 | % | ASTM D412 |
| Aging | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Change in Tensile Strength in Air 1(136°C, 168 hr) | 5.0 | % | UL Unspecified |
| Change in Ultimate Elongation in Air 2(136°C, 168 hr) | -9.0 | % | UL Unspecified |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -53.0 | °C | ASTM D746 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Dielectric Constant (23°C, 1 MHz) | 2.45 | ASTM D150 | |
| Dissipation Factor (23°C, 1 MHz) | 1.0E-3 | ASTM D150 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating (0.813 mm) | V-0 | UL 94 | |
| Oxygen Index (3.18 mm) | 30 | % | ASTM D2863 |
| Extrusion | Nominal Value | Unit | |
|---|---|---|---|
| Cylinder Zone 1 Temp. | 188 | °C | |
| Cylinder Zone 2 Temp. | 188 | °C | |
| Cylinder Zone 3 Temp. | 199 | °C | |
| Cylinder Zone 4 Temp. | 204 | °C | |
| Cylinder Zone 5 Temp. | 204 | °C | |
| Adapter Temperature | 204 | °C | |
| Melt Temperature | 199 - 210 | °C | |
| Die Temperature | 204 | °C |
| Extrusion instructions |
|---|
| Screen Pack: 40/80 or 40/100 |
| Note Message | |
|---|---|
| 1 . | Thickness: 30 mil |
| 2 . | Thickness: 30 mil |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| RTP 2740 S-40A | RTP Company | SEBS | RTP |
| MIDILENA III HDPE2200J | ROMPETROL PETROCHEMICALS S.R.L. | HDPE | MIDILENA III |
| Grivory® XE 5107 (GVL-5H V0) | EMS-GRIVORY | Nylon 66+Nylon 6I/X | Grivory® |
| EPLAMID 66 FX0 NC | EPSAN Plastik SAN. ve TiC. A.S. | Nylon 66 | EPLAMID 66 |
| LNP™ LUBRICOMP™ DL0029E compound | SABIC Innovative Plastics | PC | LNP™ LUBRICOMP™ |
