Order Products : sales@su-jiao.com
Zythane® 8060A
| Category: | TPU-Polyester , Thermoplastic Polyurethane Elastomer (Polyester) |
| Manufacturer: | Alliance Polymers & Services |
| Trademark: | Zythane® |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | KrgWAT_Zythane-8060A.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
Zythane 8060A is a polyester--based TPU/TPE--S alloy specifically formulated for extrusion & injection molding applications. It exhibits excellent abrasion resistance and toughness and has good hydrolytic stability, oil, fuel and solvent resistance. It is supplied uncolored in pellet form. Typical Applications: Zythane 8060A applications include among others spiral and pneumatic tubing, round and V belting, blow molded bellows. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.12 | g/cm³ | ASTM D792 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 59 | ASTM D2240 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Taber Abrasion Resistance | 55.0 | mg | ASTM D1044 |
| Abrasion - DIN | 50 | mm³ | DIN 53516 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Stress | ASTM D412 | ||
| 100% strain | 2.00 | MPa | ASTM D412 |
| 300% strain | 4.00 | MPa | ASTM D412 |
| Tensile Strength (Break) | 23.0 | MPa | ASTM D412 |
| Tensile Elongation (Break) | 900 | % | ASTM D412 |
| Tear Strength 1 | 34.3 | kN/m | ASTM D624 |
| Compression Set | ASTM D395B | ||
| 24°C, 22 hr | 18 | % | ASTM D395B |
| 70°C, 72 hr | 33 | % | ASTM D395B |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Brittleness Temperature | -45.0 | °C | DSC |
| Vicat Softening Temperature | 77.8 | °C | ASTM D1525 |
| Flammability | Nominal Value | Test Method | |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.00 mm | HB | UL 94 | |
| 1.50 mm | HB | UL 94 | |
| 3.00 mm | HB | UL 94 |
| Injection | Nominal Value | Unit | |
|---|---|---|---|
| Drying Temperature | 75.0 | °C | |
| Drying Time | 4.0 | hr | |
| Rear Temperature | 165 | °C | |
| Middle Temperature | 180 | °C | |
| Front Temperature | 195 | °C | |
| Nozzle Temperature | 195 - 200 | °C | |
| Processing (Melt) Temp | 190 - 195 | °C | |
| Mold Temperature | 25.0 - 60.0 | °C | |
| Back Pressure | 0.500 - 1.00 | MPa | |
| Screw Speed | 60 - 200 | rpm | |
| Clamp Tonnage | 4.1 - 6.9 | kN/cm² |
| Injection instructions |
|---|
| Injection Speed: >.4 in/sec |
| Note Message | |
|---|---|
| 1 . | C mould |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Precision Polymer V95X | Precision Polymer Engineering Ltd. | Fluorelastomer | Precision Polymer |
| NuSil FS-3730-11 | NuSil Technology | Silicone | NuSil |
| Bayblend® FR3015 | Covestro - Polycarbonates | PC+ABS | Bayblend® |
| Kotex KV-30FD | Kotec Corporation | PC | Kotex |
| OTECH PVC OM5519-Soles | OTECH Corporation | PVC, Unspecified | OTECH PVC |
