Order Products : sales@su-jiao.com

Eltex® B4020LG/35

Category:	HDPE , High Density Polyethylene
Manufacturer:	INEOS Olefins & Polymers Europe
Trademark:	Eltex®
Fillers:	-
Ports:	Qinzhou, Shekou, Shanghai, Ningbo
Delivery Terms	FOB, CIF, DAP, DAT, DDP
PDF:	Kp956U_Eltex-B4020LG-35.pdf
PRICE:	Order Products email sales@su-jiao.com

Wechat: WECHAT

Message
Eltex® B4020LGN1963 high-density polyethylene is a copolymer manufactured by INEOS Polyolefins using its supported catalyst process. It is a granular resin used for high-speed blow moulding of bottles. Its high purity makes it suitable for the packaging of both pasteurised and sterilized milk (in bottle sterilization). Eltex® B4020LG/35 contains 1% titanium dioxide Eltex ® B4020LG/34 contains 4.5 % titanium dioxide and is intended for the co extrusion of bottles for the packaging of sterilized or UHT milk. The resins guarantee the preservation of the organoleptical properties of milk and have the following essential properties: A very low odour level Good impact resistance Good heat resistance Good stress crack resistance They meet EU and FDA regulations governing the approval of materials used in the manufacture of packaging which may come into contact with food products. INEOS Polyolefins will be happy to supply customers with certificates of conformity to the various national legislations.

Message

Eltex® B4020LGN1963 high-density polyethylene is a copolymer manufactured by INEOS Polyolefins using its supported catalyst process. It is a granular resin used for high-speed blow moulding of bottles. Its high purity makes it suitable for the packaging of both pasteurised and sterilized milk (in bottle sterilization).

Eltex® B4020LG/35 contains 1% titanium dioxide
Eltex ® B4020LG/34 contains 4.5 % titanium dioxide and is intended for the co extrusion of bottles for the packaging of sterilized or UHT milk.

The resins guarantee the preservation of the organoleptical properties of milk and have the following essential properties:

A very low odour level

Good impact resistance

Good heat resistance

Good stress crack resistance

They meet EU and FDA regulations governing the approval of materials used in the manufacture of packaging which may come into contact with food products. INEOS Polyolefins will be happy to
supply customers with certificates of conformity to the various national legislations.

General Information
Additive	Titanium Dioxide (TiO2) (1%)
Features	Copolymer Food Contact Acceptable Good Impact Resistance High Density High ESCR (Stress Crack Resist.) High Heat Resistance High Purity Low to No Odor Med.-Wide Molecular Weight Distrib.
Uses	Blow Molding Applications Bottles
Agency Ratings	EU Food Contact, Unspecified Rating FDA Food Contact, Unspecified Rating
RoHS Compliance	Contact Manufacturer
Forms	Granules
Processing Method	Blow Molding

Physical	Nominal Value	Unit	Test Method
Density	0.960	g/cm³	ISO 1183/A
Melt Mass-Flow Rate (MFR) (190°C/2.16 kg)	1.8	g/10 min	ISO 1133
Viscosity ¹(190°C)	1100000	mPa·s	Internal Method

Note Message
1 .	Apparent dynamic viscosity of the material extruded at 190°C through a 1.0 mm diameter and 15 mm long die, at apparent shear rate 100/s

Resin Grade	Manufacturer	Category	Trademark
SABIC® Vestolen A 5017	Saudi Basic Industries Corporation (SABIC)	HDPE	SABIC® Vestolen A
Baytec® MS-041 (BDO)	Covestro - PUR	PUR-Ester/MDI	Baytec®
Elastocon® STK56PA	Elastocon TPE Technologies	TPE	Elastocon®
LUVOCOM® 1/GF/30/TF/15/BL	Lehmann & Voss & Co.	Nylon 66	LUVOCOM®
PLUSTEK RA301G5	Polyram Ram-On Industries	Nylon 66	PLUSTEK