Order Products : sales@su-jiao.com
DJSilicone NE-7250
| Category: | Silicone , Silicone |
| Manufacturer: | DONGJUE SILICONE (NANJING) CO., LTD |
| Trademark: | DJSilicone |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | Kp4f2x_DJSilicone-NE-7250.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
| Common silicone rubber for molding&extrusion has excellent high and low temperature resistance, electrical performance, and physical and mechanical properties. Despite of slightly worse transparency than general silicone rubber, it is more suitable for manufacturing colored products. There are two kinds of this product, namely modifying silicone rubber for molding and modifying silicone rubber for extrusion. The former can be vulcanized by DMDBH and used for manufacturing industrial accessories like keypad, seal ring and seal pad etc, while the latter can be vulcanized by DCBP and used for manufacturing wire, cable, rubber tube and rubber strip etc. |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Appearance |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Density | 1.13 to 1.23 | g/cm³ | ASTM D1505 |
| Hardness | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Durometer Hardness (Shore A) | 47 to 53 | ASTM D2240 |
| Elastomers | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Set | < 14 | % | ASTM D412 |
| Tensile Strength (Yield) | > 7.50 | MPa | ASTM D412 |
| Tensile Elongation (Break) | > 450 | % | ASTM D412 |
| Tear Strength | > 18.0 | kN/m | ASTM D624 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | > 1.0E+14 | ohms·cm | ASTM D257 |
| Dielectric Strength | > 18 | kV/mm | ASTM D149 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Sylvin 8983-70 White 1196 | Sylvin Technologies Incorporated | PVC, Unspecified | Sylvin |
| Clariant Nylon 6/6 PA-111 | Clariant Corporation | Nylon 66 | Clariant Nylon 6/6 |
| Daelim Po1y® LL-04SJ | DAELIM INDUSTRIAL CO., LTD. | LLDPE | Daelim Po1y® |
| ExxonMobil™ LDPE LD 117 Series | ExxonMobil Chemical | LDPE | ExxonMobil™ LDPE |
| Pujie CPE SE-1200 | Zhanhua Pujie Chemical Technology Co.,Ltd | CPE | Pujie |
