Order Products : sales@su-jiao.com
SumiDurez 153
| Category: | Phenolic , Phenolic |
| Manufacturer: | SumiDurez Singapore Pte Ltd |
| Trademark: | SumiDurez |
| Fillers: | - |
| Ports: | Qinzhou, Shekou, Shanghai, Ningbo |
| Delivery Terms | FOB, CIF, DAP, DAT, DDP |
| PDF: | forxxN_SumiDurez-153.pdf  |
| PRICE: | Order Products email sales@su-jiao.com |
Wechat:
| Message |
|---|
|
153 Phenolic is a two-stage, asbestos-free heat resistant / electrical molding material. It exhibits good molded appearance and shock resistance for use on a wide variety of electrical and appliance applications. 153 Phenolic is designed to meat the requirements of Mil-M-14G, Type CFG. ASTM Type 13 |
| General Information | |
|---|---|
| Features |
|
| Uses |
|
| Agency Ratings |
|
| Appearance |
|
| Forms |
|
| Processing Method |
|
| Physical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Specific Gravity | 1.53 | g/cm³ | ASTM D792 |
| Apparent Density | 0.60 | g/cm³ | ASTM D1895 |
| Bulk Factor | 2.6 | ASTM D1895 | |
| Molding Shrinkage - Flow (Compression Molded) | 0.60 to 1.1 | % | ASTM D955 |
| Water Absorption (24 hr) | 0.40 | % | ASTM D570 |
| Mechanical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Tensile Modulus (Compression Molded) | 10300 | MPa | ASTM D638 |
| Tensile Strength (Yield, Compression Molded) | 55.2 | MPa | ASTM D638 |
| Flexural Strength (Compression Molded) | 82.7 | MPa | ASTM D790 |
| Compressive Strength | 179 | MPa | ASTM D695 |
| Impact | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Notched Izod Impact (Compression Molded) | 18 | J/m | ASTM D256 |
| Thermal | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Deflection Temperature Under Load (1.8 MPa, Unannealed, Compression Molded) | 180 | °C | ASTM D648 |
| Electrical | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Volume Resistivity | 1.0E+12 | ohms·cm | ASTM D257 |
| Dielectric Strength | 15 | kV/mm | ASTM D149 |
| Comparative Tracking Index (CTI) | 225 | V | UL 746 |
| Flammability | Nominal Value | Unit | Test Method |
|---|---|---|---|
| Flame Rating | UL 94 | ||
| 1.02 mm | V-1 | ||
| 1.47 mm | V-0 |
| Resin Grade | Manufacturer | Category | Trademark |
|---|---|---|---|
| Matrixx CPP3B10 | The Matrixx Group, Inc. | PP Copolymer | Matrixx |
| Miramid® S3CW | BASF Leuna GmbH | Nylon 66 | Miramid® |
| Hostaform® S 9364 XAP² ™ | Celanese Corporation | Acetal (POM) Copolymer | Hostaform® |
| Iupilon® EFT3200H | Mitsubishi Engineering-Plastics Corp | PC | Iupilon® |
| OmniLon™ PA6/6 GR33 LM BK2000 | OMNI Plastics, LLC | Nylon 66 | OmniLon™ |
